» Topic: Another error
- December 12, 2013 at 1:57 pm #16431
This is probably an easy one that I’m just drawing a blank on, but can anybody help me resolve this? Here’s a screenshot.
Attachments:You must be logged in to view attached files.December 13, 2013 at 8:29 am #16436
Try navigating to the4 file location that the error is telling you to go to. See if the file is located in that folder. If it is, Make a copy of it and move it to your Desktop and try and open the file in BobCAD from that location.
If it isn’t in that folder then it may be referencing that incorrect location.December 18, 2013 at 10:34 am #16510
Thank you. That worked. Seems to be fine now.
So today’s new error is a missing “MachSim.CL” file when I try to run the mill simulation. Any ideas? Thank you.December 18, 2013 at 3:57 pm #16634
The mach Sim folder is your Machine Folder.
Right Click on Milling Tools inside your CAM Tree under CAM Part. Then go down to Part and then Current Settings. Go to the tab on the left that says Posting. Under the NC filepath. Make sure that the location is set to match the location below.
C:\BobCAD-CAM Data\BobCAD-CAM V25\NC\Mill
If that works, Make the same change as above except when you Right Click on Milling Tools go to Default and then Current Settings, not Part.
If that doesn’t work, then try Changing your machine by Right Clicking on Milling Tools inside your CAM Tree under CAM Part. Then go down to Part and then Current Settings.
When it opens go to the Tab on the left that says Machine Parameters. Tyr selecting one of the bobCAD Machines like the BC_3X_Mill. and then click on the Posting tab on the left and select your Post from the Post Processor box.
Let me know if any of that helps.December 19, 2013 at 7:22 pm #16648
I tried your suggestions to no success. Should I be able to see the MachSim.cl file in Windows Explorer file tree? I can’t find one anywhere.
Attachments:You must be logged in to view attached files.December 20, 2013 at 11:28 am #16650
The MachSIM files are the machines that are used when Simulating. They can be found here:
C:\BobCAD-CAM Data\BobCAD-CAM V25\MachSim
Make sure that the machine you have selected in the Current Settings actually exists inside that folder.December 20, 2013 at 2:31 pm #16651
I have selected the standard bc_3x_mill and it won’t simulate. It won’t simulate no matter what machine I choose. With all these problems, I’m starting to think the installation was botched thanks to our “trusty” I.T. guy.January 7, 2014 at 10:06 am #16711
Found the problem. I had to set the properties of the launch icon to “Run as administrator.” Works fine now.
You must be logged in to reply to this topic.
- Ball nose tools into tight corner features by Barrie1 week, 4 days ago
- Load a V carve tool into 3 axis operation by mgdpapa1 month, 1 week ago
- version 28 large NC file when posted by [email protected]1 month, 1 week ago
- error r6025/bobcad v27 glitches w/windows10 by jakeg1 month, 1 week ago
- 3d mill angled headstock by eric2 weeks, 5 days ago