Open Source Sofware

» Topic: Cannot use two g codes that both use axis value Line

Home New Forums BobCAD-CAM Forums Cannot use two g codes that both use axis value Line

This topic contains 1 reply, has 2 voices, and was last updated by  Sean 2 years, 7 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #16887

    rick
    Participant

    In V25 I wrote a program that has a drill and 2 mill features.
    It simulates correctly in Bobcad, but when I upload it to MACH 3 and try and run it I get the error “Cannot use two g codes that both use axis value Line” and the highlited gcod line is something like “G00 G91 G28 Z0″
    Is this just a wrong post processor problem?
    Thanks.
    Rick

    #16890

    Sean
    Participant

    The issue may have to do with the G00 and G28 being on the same line. Try removing the G00 from the line, and if that works, please submit the issue to support and we can modify that line of code.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

Forum Account

     Lost Password / Register   

Sharing

facebooktwittergoogle_pluspinterestlinkedinmail