Open Source Sofware

» Topic: getting 406 alarm in thread

Home New Forums BobCAD-CAM Forums getting 406 alarm in thread

This topic contains 0 replies, has 1 voice, and was last updated by  Jorge 1 year, 9 months ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #20586

    Jorge
    Participant

    hello can some one help me im using v26 and have an error of feed speed, AND i DONT KNOW HOW TO CALCULATE THIS…..
    G0 G97 S500 M03
    ( START SPINDLE S200 RPM)
    G50 S240
    G97 S200 M03
    G0 X4.2 Z2.
    M08
    G97 S200
    G0 X2.2 Z-.0082
    G1 X1.9706
    G32 Z-2.5 F.2
    G0 X2.2
    Z-.016
    G1 X1.9422
    G32 Z-2.5 F.2
    G0 X2.2
    Z-.0236
    G1 X1.915
    G32 Z-2.5 F.2
    G0 X2.2
    Z-.0308
    G1 X1.8888
    G32 Z-2.5 F.2
    G0 X2.2
    Z-.0378
    G1 X1.8637
    G32 Z-2.5 F.2
    G0 X2.2
    Z-.0445
    G1 X1.8396
    G32 Z-2.5 F.2
    G0 X2.2
    Z-.0508
    G1 X1.8166
    G32 Z-2.5 F.2
    G0 X2.2
    Z-.0569
    G1 X1.7945
    G32 Z-2.5 F.2
    G0 X2.2
    Z-.0628
    G1 X1.7735
    G32 Z-2.5 F.2
    G0 X2.2
    Z-.0661
    G1 X1.7616
    G32 Z-2.5 F.2
    G0 X2.2
    Z-.0661
    G1 X1.7616
    G32 Z-2.5 F.2
    G0 X2.2
    Z-.0661
    G1 X1.7616
    G32 Z-2.5 F.2
    G0 X2.2
    Z-.0661
    G1 X1.7616
    G32 Z-2.5 F.2
    G0 X2.2
    Z-.0661
    G1 X1.7616
    G32 Z-2.5 F.2
    G0 X2.2
    Z-.0661
    G1 X1.7616
    G32 Z-2.5 F.2
    G0 X2.2
    Z-.0661
    G1 X1.7616
    G32 Z-2.5 F.2
    G0 X2.2
    Z-.0661
    G1 X1.7616
    G32 Z-2.5 F.2
    G0 X2.2
    X4.
    Z2.
    G97
    G30 U0 W0
    M1
    M09
    M30

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.

Forum Account

     Lost Password / Register   

Sharing

facebooktwittergoogle_pluspinterestlinkedinmail