BobCAD-CAM |
Groups
Group Admins
No Admins
BobCAD-CAM
Public Group active 8 hours, 14 minutes ago agoExpand your professional network and learn more about BobCAD-CAM Mill, Lathe, Nesting, Wire and Art at the same time by taking part in this group.
-
Louis replied to the forum topic toolcrib and dovetail cutters in the group
BobCAD-CAM 8 hours, 14 minutes agoThanks -
Sowen replied to the forum topic fit text to curve in the group
BobCAD-CAM 4 days, 11 hours ago -
Sowen replied to the forum topic toolcrib and dovetail cutters in the group
BobCAD-CAM 4 days, 11 hours agoOnly the 4&5 Axis Pro Modules will compensate for the DoveTail Cutter. (Under Cutting) . If you own the 4 or 5 axis pro you can use this tool to accomplish this. The 4 & 5 Axis Pro modules account for […] -
Louis started the forum topic toolcrib and dovetail cutters in the group
BobCAD-CAM 5 days, 2 hours agoHello all, I”m having an issue I hope someone can help me with, a) I need to mill a dovetail, b) I made up a dovetail cutter and saved it to my “milling tool library”, c) I have the dovetail cutter […] -
Louis joined the group
BobCAD-CAM 5 days, 2 hours ago -
briandy started the forum topic fit text to curve in the group
BobCAD-CAM 1 week agoCan’t get this to work -
briandy joined the group
BobCAD-CAM 1 week ago -
Nick started the forum topic Incorrect Units Set in G-Code in the group
BobCAD-CAM 2 weeks, 4 days agoMoved to correct section – I’m new here
-
Nick joined the group
BobCAD-CAM 2 weeks, 5 days ago -
Norvin replied to the forum topic Cutting Electrodes w/ V23 in the group
BobCAD-CAM 3 weeks, 1 day agoYes you can put in a (-) in the allowance and it will remove the value you input. But if you are doing 3 D machining. By putting in say .010 it will remove that value in the (Z) axis as well. If this is not […] -
Norvin posted an update in the group
BobCAD-CAM 3 weeks, 1 day agoHi everyone. I have the version 25. I have ran into a problem on drilling a bolt hole pattern on a flange of a hub. I set the clearance plane in the stock wizard high enough to clear the center boss which is considerably taller than the flange where the holes will be drilled. Then in the drill feature, under material approach I set the rapid plane…[Read more] -
Norvin joined the group
BobCAD-CAM 3 weeks, 1 day ago -
John replied to the forum topic Tube coping templates in the group
BobCAD-CAM 3 weeks, 2 days agoBobcad said that they get a lot of requests for this for HVAC type stuff, but the software does not currently support flattening as described here. They plan on having it in future releases, but no specifics. -
John started the forum topic Tube coping templates in the group
BobCAD-CAM 3 weeks, 3 days agoIs it possible, and if so how, to take a 3d design (square tube into round tube) and make a printable template to cope them out via grinder? or import into my plasma cutting cad/cam? -
John joined the group
BobCAD-CAM 3 weeks, 3 days ago -
Keith started the forum topic V25 drilling in Nesting in the group
BobCAD-CAM 3 weeks, 3 days agoHi everyone I have a cnc router and use nesting for 99% of my maching.My problem is when posting.On parts with holes to be drilled I create a new layer called holes for drilling this seperates the holes from […] -
Keith joined the group
BobCAD-CAM 3 weeks, 3 days ago -
Keith replied to the forum topic v25 Nesting : Operation Order? in the group
BobCAD-CAM 3 weeks, 3 days agoTodd You can control this by going to edit nesting and open up parameters you will see by part and by sheet ,pick by sheet and pick ok redo compute toolpath . this will do all drilling of all parts first […] -
Coy joined the group
BobCAD-CAM 1 month, 1 week ago -
Ed replied to the forum topic Z-Axis angles down when traveling from feature to feature in the group
BobCAD-CAM 1 month, 2 weeks agoRichard, thank you that was the problem. I have spent a week trying different things with no success, I would have never thought to change these settings. I haven’t run it on the mill yet but Flashcut CNC (my […] - Load More
