Rob | Activity Streams
-
Rob replied to the forum topic All settings mm but G-Code in Inches in the group
BobCAD-CAM Support 2 weeks, 4 days agoNick Yes, changing it to metric_mode will do it, alternatively you can “hard code” a G21 in there simply by deleting the inch_mode and putting “G21″ in it`s place, the same as the G40 is shown, has to be in […] -
Rob replied to the forum topic All settings mm but G-Code in Inches in the group
BobCAD-CAM Support 2 weeks, 4 days agoNick Yes, it is indeed set in the Post processor, open your Post in Notepad and look at line 213 :- 213. English or Metric format (E/M)? E If it is as shown above change the E to an M and then go to […] -
Rob replied to the forum topic Z-Axis angles down when traveling from feature to feature in the group
BobCAD-CAM 1 month, 2 weeks agoEd It looks like your line N160 is the problem line, it is showing an X,Y and Z movement at Feed Rate. I don`t know which Post Processor you are using but looking at the “Generic Router” Post Processor in […] -
Rob joined the group
General Discussion 1 month, 2 weeks ago -
Rob replied to the forum topic V25 how to send to machine? in the group
General Discussion 1 month, 2 weeks agoIf you have the Predator Level 1 that should do your DNC to the machine for you. Regards Rob

Members
