What's New in BobCAD-CAM V30 SP2 (Build 2638)
In this Topic ShowHide
Introduction
Release Date: November 22,
2017
The second update
for BobCAD-CAM V30, build 2638, includes fixes in CAD, CAM, and Simulation.
Corrections and Enhancements
General
CAD
- BobCAD-CAM
now supports SolidWorks 2018 file reading.
- Corrected
issues with some font variations not appearing in the text font list.
- Corrected
a crash when attempting to edit fillets created in previous versions
using the CAD Tree.
- Corrected
a crash when opening the Fillet / Chamfer function an immediately
clicking OK.
CAM
General
- Corrected features in the CAM Tree to remain collapsed after editing
a feature.
Mill
- Corrected
an instance of a particular file causing a crash when opened.
- Removed
the Pick Depth button for Chamfer Mill operation inside of Hole making
features due to the groups and having multiple Top of Features.
- Corrected
an issue with the Chamfer Mill inside a Drill feature ignoring the
top of part.
- Corrected
an issue with custom machining orders reverting to default order when
saving and reopening.
- Corrected
an instance of external corners being applied to the inside of the
chain due to misreading chain direction.
- Corrected
an issue with indexed features failing to output/cancel machine compensation
when the leads first/last movement is in line with the Z direction
of the machine setup.
- Correct
an issue with the V-Carve operations failing to output a plunge feed.
- Corrected
an issue with blind tapping posting incorrect depth.
- Corrected
an issue with the Cutting Condition Parameter Add
to Drill Depth for Blind Tap not outputting.
- Corrected
an instance of a edge selection causing a blind hole setting to switch
to a through hole setting when reselecting geometry.
- Corrected
an instance of one tab failing to create when selecting three automatic
tabs on a circle.
- Corrected
the Corner Round tool to use the speeds and feeds assigned to it during
the creation of the tool.
Lathe
- Corrected
an issue when selecting custom insert geometry for a lathe tool. When
switching from system tool to custom tool, and then selecting geometry,
the option would switch back to system tool again, forcing you to
switch the option once more.
- Corrected
an instance of incorrect toolpath when using system compensation without
collision detection.
Corrected an instance of a custom groove tool creating a gouge.
Removed the Machine Compensation options for Cut Off cycle to
eliminate confusions on whether the user is attempting to compensate
the tool width or the corner radius.
- Corrected
an issue when selecting custom insert geometry for a lathe tool. When
switching from system tool to custom tool, and then selecting geometry,
the option would switch back to system tool again, forcing you to
switch the option once more.
- Corrected
a crash when clicking Cancel when in the custom insert geometry dialog
without picking any geometry.
Mill Turn
- Corrected a particular instance of a crash when a turret was assigned
over 18 stations.
- Corrected an instance of a saved lathe feature retaining original
stock information.
Simulation
- Corrected a posting issue when a tab was created on a spline resulting
in a very large radius arc.