Posting
Introduction
Once the machining strategy has been set, the next step is to define a few posting parameters for the feature. This includes the work offset number, indexing output, and a few tolerance settings for the output program code.
Posting Parameters
-
Work Offset # - select the work offset code to use for this feature in the posted NC program. The post processor must be configured to support the work offset selected.
- Output Rotary Angle - available with the 4 Axis Standard, 4 Axis Pro, 5 Axis Standard, and 5 Axis Pro modules.
Select the check box to have the Rotation Angle output in the posted NC
program.
Clear the check box when not outputting a rotary angle.
-
- Rotation Angle - type the rotary angle of the feature for indexing.
Contour Ramping Output
-
Line Moves - the toolpath is output as linear segments. This option is used if the machine controller does not accept helical arc segments.
-
Arc Moves - the toolpath output includes helical arc segments.
Depending on what you selected for your current operations in the Machining Strategy page clicking Next>> could take you to either:
Next Topic
click Next>> to go to set up the tools.