Arc 2 Points - Center

Introduction

This topic will explain the Arc 2 Points - Center function, will explain where to find the function, and explain the options found in it. This topic will also give a brief description of Dynamic Drawing, the Snap Increment function, explain creation with quick steps, and provide links to related topics.

The Arc 2 Points - Center Function

The Arc 2 Points -Center function is used to create arcs of a specified radius, and start and end angles, by defining the origin of the arc, and its radius by selecting two points in the graphics area. This can be accomplished by picking two points or snap points in the graphics area, and altering the data entry information as needed.

Dynamic Drawing

This function supports Dynamic Drawing which allows you to use a combination of sketching and data entry to create the entities. After initially sketching the entity, it becomes an active entity, which is an entity that is in Modify Mode. Entities in Modify Mode display in the current Entity color, but displays with a greater line thickness to make them easier to identify. Active entities can be modified using data entry. The benefit of Dynamic Drawing is that you can quickly sketch a point to get the approximate result and then use data entry to update to the exact dimensions, and coordinate values as needed.

 

Entities in Modify Mode

Final Entities

 

In the images above, we see entities which are still in Modify Mode, followed by those same entities after they are finalized.

Snap Increment

This function support the use of the snap increment when selecting the location of the entities. The snap increment allows you to get precise results when using mouse selection and helps to reduce data entry modifications.

 

To learn more, view Snap Increment.

To open Arc 2 Points - Center:

 

  • In the Entity group, of the Create 2D ribbon, click the down arrow under Arc, and select Arc 2 Points - Center.

 

The parameters display in the Data Entry Manager.

The Data Entry Parameters

Creation Option

 

                 

 

Parameters

 

Center

 

  • X - sets the location of the arc center along the X axis.

  • Y - sets the location of the arc center along the Y axis.

  • Z - sets the location of the arc center along the Z axis.

 

Dimensions

 

  • Radius - sets the distance from the center of the arc to the circumference.

  • Start Angle - sets the rotation angle at which the arc begins measured from the positive X-axis.

  • End Angle - sets the rotation angle at which the arc ends measured from the positive X-axis.

 

  • Other Half - allows you to choose the other half of the specified angle range.

     

  • OK - finalizes the function.
  • Cancel - exits the function.

Quick Steps - Arc 2 Points - Center

 

  1. Open the function and click a snap point or anywhere in the graphics area to set the arc center.

    You can modify the snap increment value or turn it off while selecting the arc center and the arc radius.



  2. Move the mouse pointer and click a snap point or anywhere to set the arc radius.

    The arc changes from the Preview color to the Entity color and displays with a greater line thickness to show it is the active entity.



  3. With Dynamic Drawing, you can update the Data Entry parameters to modify the active entity, or you can continue sketching.

    If you continue sketching, the active entity is automatically finished.

  4. After updating the Data Entry parameters, to finish the active entity, you can either click OK or you can click the next arc center.



    Repeat this process of using sketching and data entry to create arcs as needed.

  5. To close the function, click Cancel.

Related Topics

The CAD Overview