Tool Library

Introduction

This topic will explain the Tool Library, explain where the tool library can be accessed from, explain the options found in it, and provide links to related topics.

The Tool Library

The Tool Library contains all of the available system tools based on the main categories Drill, Mill, Lathe, Laser, Plasma, and Waterjet. This dialog box is used to add, delete, and modify tools. You can also load tool information from a previously saved file. On the left side of the dialog box is a list of the supported tool types. The right side contains the tool parameters list for each tool.

 

Tip: To learn about all the functionality available in the Tool Library, see the Tool Library Functionality topic.

 

Taking the time to create all of the tools in your shop can greatly speed up the process of creating milling features. You can then add the tools to the Tool Crib to quickly create the equivalent of the tool changer for each job. The Tool Crib tool list can be saved to a file for repeated use.

 

When you select a tool for a feature wizard operation, a filtered version the Tool Library is displayed which only displays the appropriate tool types based on the operation type.

To access the Tool Library, do one of the following:

 

  • In the CAM Tree, right-click CAM Defaults, and click Tool Library.

 

This method is used to view, add, or modify tools in the Tool Library.

 

  • In the  CAM Tree, right-click Milling Tools, Turning Tools, or Mill Turn Toolsand click Tool Library.

 

Note: This opens the Tool Library showing only tools for the selected job type (Mill, Lathe, or both in the case of a Mill Turn job).

 

  • In the Tool Crib dialog box, click Add From Tool Library.

 

Note: This method is used to add a tool from the Tool Library to the Tool Crib, and accesses a filtered version of the Tool Library which shows only the tool type being added.

The Dialog Box Parameters

From this tool page, you can either, choose a different tool from the Tool Crib, go into the Tool Crib to add tools from your Tool Library, or enter tool specific data manually into the Tool Data Section of the page. This page will also assist in assigning Tool Numbers and Offsets, and Coolant options, as well as Speeds and Feeds.

 

  • Save As - opens the Save As dialog to allow you to save the library as either a .MTOOLS file, or a .XML file of a particular name. This can then be imported on another work station and merged into that library.

  • Import from File - displays the Open dialog box allowing you to navigate to and load a previously saved Tool Library, or MachiningCloud file (.mtools, .ltools, .xml or .zip). This option will merge the selected tool library file into your existing library. In the case of using the MachiningCloud .zip, selecting and opening the file will launch the MachiningCloud Import dialog.

  • Add - automatically creates a default tool and places it in the Tool Parameters section to allow you to modify it.

  • Delete - removes the selected tool.

  • OK - confirms the changes made to the tools and closes the Tool Library dialog.

  • Cancel - closes the Tool Library dialog without saving any changes made to the library.

 

Note: The available Tool Parameters vary depending on the type of tool selected. Click on a tool to display the Tool Parameters for that particular tool.

Drill

ClosedCenter Drill

Tool Parameters

 

  • Tool Label - allows you to set, or modify, a tool name.

  • Diameter (1) - sets the diameter of the tool.

  • Sm. Dia. (2)- sets the small diameter of the tool.

  • Angle (3) - sets the angle of the area between the Small Diameter (2)  and the Diameter (1).

  • Point Angle (4) - sets the angle of the tip of the Center Drill.

  • Sm.Dia.Len. - sets the length of the Small Diameter from end of Point Angle (4) to beginning of Angle (3).

  • Number of Flutes - specifies the number of cutting flutes for the tool.

  • Overall Length - set the total length of the tool. This value must be greater than the Protrusion Length.

  • Protrusion Length - sets the distance that the tool protrudes from the tool arbor when a tool holder is assigned to the tool.

  • Tool Number - sets the number to be used in tool callout unless otherwise specified.

  • Tool Material - is the tool material type of the selected tool.
 

 

Tool Holder

 

  • Holder Label - displays the name of the associated tool holder. When blank, no tool holder is associated.

  • Assign/Remove Tool Holder - When no tool holder has been assigned, the Holder Label will be blank, and the button will read: Assign Tool Holder. This will open The Milling Tool Holder Library to allow you to select, or create a tool holder to associate with the selected tool. Once a tool holder has been assigned, the button will read: Remove Tool Holder. This will remove the association between the tool holder and the selected tool.

 

Feeds and Speeds

 

  • Use System Feeds and Speeds

    Select this check box to automatically calculate the feeds and speeds.

    Clear this check box to type feeds and speeds values manually.

  • Spindle Speed/RPM - is the revolutions per minute of the spindle.

  • Plunge Feedrate - is the downward feedrate. This value is linked to the Plunge Feed per Tooth.

 

Custom Geometry

 

  • Assign Tool Geometry - hides the Tool Library and opens the Tool Shape Picking dialog to allow you to select geometry from the graphics area to assign as the shape of the tool. You can learn more about assigning custom tools in the Assigning Custom Tools topic.

 

ClosedDrill

Tool Parameters

 

  • Tool Label - allows you to set, or modify, a tool name.

  • Diameter (1) - sets the diameter of the tool.

  • Point Angle (2) - sets the angle of the tip of the Center Drill.

  • Flute Length (3) - sets the length of the flute/cutting portion of the tool.

  • Num Flutes - specifies the number of cutting flutes for the tool.

  • Overall Length - set the total length of the tool. This value must be greater than the Protrusion Length.

  • Protrusion Length - sets the distance that the tool protrudes from the tool arbor when a tool holder is assigned to the tool.

  • Tool Number - sets the number to be used in tool callout unless otherwise specified.

  • Tool Material - is the tool material type of the selected tool.
 

 

Tool Holder

 

  • Holder Label - displays the name of the associated tool holder. When blank, no tool holder is associated.

  • Assign/Remove Tool Holder - When no tool holder has been assigned, the Holder Label will be blank, and the button will read: Assign Tool Holder. This will open The Milling Tool Holder Library to allow you to select, or create a tool holder to associate with the selected tool. Once a tool holder has been assigned, the button will read: Remove Tool Holder. This will remove the association between the tool holder and the selected tool.

 

Feeds and Speeds

 

  • Use System Feeds and Speeds

    Select this check box to automatically calculate the feeds and speeds.

    Clear this check box to type feeds and speeds values manually.

  • Spindle Speed/RPM - is the revolutions per minute of the spindle.

  • Plunge Feedrate - is the downward feedrate. This value is linked to the Plunge Feed per Tooth.

 

Custom Geometry

 

  • Assign Tool Geometry - hides the Tool Library and opens the Tool Shape Picking dialog to allow you to select geometry from the graphics area to assign as the shape of the tool. You can learn more about assigning custom tools in the Assigning Custom Tools topic.

 

ClosedSpiral Tap

Tool Parameters

 

  • Tool Label - is the name of the tool.

  • Thread-  displays the thread type and size. Click the button to launch the Thread Type dialog to allow you to change the Thread Type and Thread Size.

  • Inef. Num of Thread (1) - sets the ineffective length for tap tools using the number of threads.
  • Flute Length (2) - sets the length of the flute/cutting portion of the tool.
  • Thread Direction - Select Right Hand or Left Hand to determine which direction the thread is tightened in.

  • Overall Length - set the total length of the tool. This value must be greater than the Protrusion Length.
  • Protrusion Length - sets the distance that the tool protrudes from the tool arbor when a tool holder is assigned to the tool.

  • Tool Number - sets the number to be used in tool callout unless otherwise specified.

  • Tool Material - is the tool material type of the selected tool.
 

 

Tool Holder

 

  • Holder Label - displays the name of the associated tool holder. When blank, no tool holder is associated.

  • Assign/Remove Tool Holder - When no tool holder has been assigned, the Holder Label will be blank, and the button will read: Assign Tool Holder. This will open The Milling Tool Holder Library to allow you to select, or create a tool holder to associate with the selected tool. Once a tool holder has been assigned, the button will read: Remove Tool Holder. This will remove the association between the tool holder and the selected tool.

 

Feeds and Speeds

 

  • Use System Feeds and Speeds

    Select this check box to automatically calculate the feeds and speeds.

    Clear this check box to type feeds and speeds values manually.

  • Spindle Speed/RPM - is the revolutions per minute of the spindle.

 

Custom Geometry

 

  • Assign Tool Geometry - hides the Tool Library and opens the Tool Shape Picking dialog to allow you to select geometry from the graphics area to assign as the shape of the tool. You can learn more about assigning custom tools in the Assigning Custom Tools topic.

 

ClosedPoint Tap

Tool Parameters

 

  • Tool Label - is the name of the tool.

  • Thread-  displays the thread type and size. Click the button to launch the Thread Type dialog to allow you to change the Thread Type and Thread Size.

  • Inef. Num of Thread (1) - sets the ineffective length for tap tools using the number of threads.
  • Flute Length (2) - sets the length of the flute/cutting portion of the tool.
  • Thread Direction - Select Right Hand or Left Hand to determine which direction the thread is tightened in.

  • Overall Length - set the total length of the tool. This value must be greater than the Protrusion Length.
  • Protrusion Length - sets the distance that the tool protrudes from the tool arbor when a tool holder is assigned to the tool.

  • Tool Number - sets the number to be used in tool callout unless otherwise specified.

  • Tool Material - is the tool material type of the selected tool.
 

 

Tool Holder

 

  • Holder Label - displays the name of the associated tool holder. When blank, no tool holder is associated.

  • Assign/Remove Tool Holder - When no tool holder has been assigned, the Holder Label will be blank, and the button will read: Assign Tool Holder. This will open The Milling Tool Holder Library to allow you to select, or create a tool holder to associate with the selected tool. Once a tool holder has been assigned, the button will read: Remove Tool Holder. This will remove the association between the tool holder and the selected tool.

 

Feeds and Speeds

 

  • Use System Feeds and Speeds

    Select this check box to automatically calculate the feeds and speeds.

    Clear this check box to type feeds and speeds values manually.

  • Spindle Speed/RPM - is the revolutions per minute of the spindle.

 

Custom Geometry

 

  • Assign Tool Geometry - hides the Tool Library and opens the Tool Shape Picking dialog to allow you to select geometry from the graphics area to assign as the shape of the tool. You can learn more about assigning custom tools in the Assigning Custom Tools topic.

 

ClosedHand Tap

Tool Parameters

 

  • Tool Label - is the name of the tool.

  • Thread-  displays the thread type and size. Click the button to launch the Thread Type dialog to allow you to change the Thread Type and Thread Size.

  • Inef. Num of Thread (1) - sets the ineffective length for tap tools using the number of threads.
  • Flute Length (2) - sets the length of the flute/cutting portion of the tool.
  • Thread Direction - Select Right Hand or Left Hand to determine which direction the thread is tightened in.

  • Overall Length - set the total length of the tool. This value must be greater than the Protrusion Length.
  • Protrusion Length - sets the distance that the tool protrudes from the tool arbor when a tool holder is assigned to the tool.

  • Tool Number - sets the number to be used in tool callout unless otherwise specified.

  • Tool Material - is the tool material type of the selected tool.
 

 

Tool Holder

 

  • Holder Label - displays the name of the associated tool holder. When blank, no tool holder is associated.

  • Assign/Remove Tool Holder - When no tool holder has been assigned, the Holder Label will be blank, and the button will read: Assign Tool Holder. This will open The Milling Tool Holder Library to allow you to select, or create a tool holder to associate with the selected tool. Once a tool holder has been assigned, the button will read: Remove Tool Holder. This will remove the association between the tool holder and the selected tool.

 

Feeds and Speeds

 

  • Use System Feeds and Speeds

    Select this check box to automatically calculate the feeds and speeds.

    Clear this check box to type feeds and speeds values manually.

  • Spindle Speed/RPM - is the revolutions per minute of the spindle.

 

Custom Geometry

 

  • Assign Tool Geometry - hides the Tool Library and opens the Tool Shape Picking dialog to allow you to select geometry from the graphics area to assign as the shape of the tool. You can learn more about assigning custom tools in the Assigning Custom Tools topic.

 

ClosedRolling Tap

Tool Parameters

 

  • Tool Label - is the name of the tool.

  • Thread-  displays the thread type and size. Click the button to launch the Thread Type dialog to allow you to change the Thread Type and Thread Size.

  • Inef. Num of Thread (1) - sets the ineffective length for tap tools using the number of threads.
  • Flute Length (2) - sets the length of the flute/cutting portion of the tool.
  • Thread Direction - Select Right Hand or Left Hand to determine which direction the thread is tightened in.

  • Overall Length - set the total length of the tool. This value must be greater than the Protrusion Length.
  • Protrusion Length - sets the distance that the tool protrudes from the tool arbor when a tool holder is assigned to the tool.

  • Tool Number - sets the number to be used in tool callout unless otherwise specified.

  • Tool Material - is the tool material type of the selected tool.
 

 

Tool Holder

 

  • Holder Label - displays the name of the associated tool holder. When blank, no tool holder is associated.

  • Assign/Remove Tool Holder - When no tool holder has been assigned, the Holder Label will be blank, and the button will read: Assign Tool Holder. This will open The Milling Tool Holder Library to allow you to select, or create a tool holder to associate with the selected tool. Once a tool holder has been assigned, the button will read: Remove Tool Holder. This will remove the association between the tool holder and the selected tool.

 

Feeds and Speeds

 

  • Use System Feeds and Speeds

    Select this check box to automatically calculate the feeds and speeds.

    Clear this check box to type feeds and speeds values manually.

  • Spindle Speed/RPM - is the revolutions per minute of the spindle.

 

Custom Geometry

 

  • Assign Tool Geometry - hides the Tool Library and opens the Tool Shape Picking dialog to allow you to select geometry from the graphics area to assign as the shape of the tool. You can learn more about assigning custom tools in the Assigning Custom Tools topic.

 

ClosedChamfer Tool

Tool Parameters

 

  • Tool Label - is the name of the tool.

  • Diameter (1) - sets the diameter of the tool.

  • Sm. Dia. (2) - sets the small diameter of the tool.

  • Angle (3) - sets the angle of the area between the Small Diameter (2)  and the Diameter (1).

  • Inef. Length - specifies the length of extension on the small diameter that is not used for cutting.

  • Number of Flutes - specifies the number of cutting flutes for the tool.

  • Overall Length - set the total length of the tool. This value must be greater than the Protrusion Length.

  • Protrusion Length - sets the distance that the tool protrudes from the tool arbor when a tool holder is assigned to the tool.

  • Tool Number - sets the number to be used in tool callout unless otherwise specified.

  • Tool Material - is the tool material type of the selected tool.
 

 

Tool Holder

 

  • Holder Label - displays the name of the associated tool holder. When blank, no tool holder is associated.

  • Assign/Remove Tool Holder - When no tool holder has been assigned, the Holder Label will be blank, and the button will read: Assign Tool Holder. This will open The Milling Tool Holder Library to allow you to select, or create a tool holder to associate with the selected tool. Once a tool holder has been assigned, the button will read: Remove Tool Holder. This will remove the association between the tool holder and the selected tool.

 

Feeds and Speeds

 

  • Use System Feeds and Speeds

    Select this check box to automatically calculate the feeds and speeds.

    Clear this check box to type feeds and speeds values manually.

  • Spindle Speed/RPM - is the revolutions per minute of the spindle.

  • Plunge Feedrate - is the downward feedrate. This value is linked to the Plunge Feed per Tooth.

 

Custom Geometry

 

  • Assign Tool Geometry - hides the Tool Library and opens the Tool Shape Picking dialog to allow you to select geometry from the graphics area to assign as the shape of the tool. You can learn more about assigning custom tools in the Assigning Custom Tools topic.

 

ClosedCounterbore

Tool Parameters

 

  • Tool Label - allows you to set, or modify, a tool name.

  • Diameter (1) - sets the diameter of the tool.

  • Sm. Dia. (2)- sets the small diameter of the tool.

  • Flute Length (3) - sets the length of the flute/cutting portion of the tool.

  • Sm.Dia.Len. - sets the length of the Small Diameter from end of Point Angle (4) to beginning of Angle (3).

  • Number of Flutes - specifies the number of cutting flutes for the tool.

  • Overall Length - set the total length of the tool. This value must be greater than the Protrusion Length.

  • Protrusion Length - sets the distance that the tool protrudes from the tool arbor when a tool holder is assigned to the tool.

  • Tool Number - sets the number to be used in tool callout unless otherwise specified.

  • Tool Material - is the tool material type of the selected tool.
 

 

Tool Holder

 

  • Holder Label - displays the name of the associated tool holder. When blank, no tool holder is associated.

  • Assign/Remove Tool Holder - When no tool holder has been assigned, the Holder Label will be blank, and the button will read: Assign Tool Holder. This will open The Milling Tool Holder Library to allow you to select, or create a tool holder to associate with the selected tool. Once a tool holder has been assigned, the button will read: Remove Tool Holder. This will remove the association between the tool holder and the selected tool.

 

Feeds and Speeds

 

  • Use System Feeds and Speeds

    Select this check box to automatically calculate the feeds and speeds.

    Clear this check box to type feeds and speeds values manually.

  • Spindle Speed/RPM - is the revolutions per minute of the spindle.

  • Plunge Feedrate - is the downward feedrate. This value is linked to the Plunge Feed per Tooth.

 

Custom Geometry

 

  • Assign Tool Geometry - hides the Tool Library and opens the Tool Shape Picking dialog to allow you to select geometry from the graphics area to assign as the shape of the tool. You can learn more about assigning custom tools in the Assigning Custom Tools topic.

 

ClosedReamer

Tool Parameters

 

  • Tool Label - allows you to set, or modify, a tool name.

  • Diameter (1) - sets the diameter of the tool.

  • Ineffective Length (2) - sets the length of the chamfer on the tip of the tool.

  • Flute Length (3) - sets the length of the flute/cutting portion of the tool.

  • Number of Flutes - specifies the number of cutting flutes for the tool.

  • Overall Length - set the total length of the tool. This value must be greater than the Protrusion Length.

  • Protrusion Length - sets the distance that the tool protrudes from the tool arbor when a tool holder is assigned to the tool.

  • Tool Number - sets the number to be used in tool callout unless otherwise specified.

  • Tool Material - is the tool material type of the selected tool.
 

 

Tool Holder

 

  • Holder Label - displays the name of the associated tool holder. When blank, no tool holder is associated.

  • Assign/Remove Tool Holder - When no tool holder has been assigned, the Holder Label will be blank, and the button will read: Assign Tool Holder. This will open The Milling Tool Holder Library to allow you to select, or create a tool holder to associate with the selected tool. Once a tool holder has been assigned, the button will read: Remove Tool Holder. This will remove the association between the tool holder and the selected tool.

 

Feeds and Speeds

 

  • Use System Feeds and Speeds

    Select this check box to automatically calculate the feeds and speeds.

    Clear this check box to type feeds and speeds values manually.

  • Spindle Speed/RPM - is the revolutions per minute of the spindle.

  • Plunge Feedrate - is the downward feedrate. This value is linked to the Plunge Feed per Tooth.

 

Custom Geometry

 

  • Assign Tool Geometry - hides the Tool Library and opens the Tool Shape Picking dialog to allow you to select geometry from the graphics area to assign as the shape of the tool. You can learn more about assigning custom tools in the Assigning Custom Tools topic.

 

ClosedBoring

Tool Parameters

 

  • Tool Label - allows you to set, or modify, a tool name.

  • Diameter (1) - sets the diameter of the tool.

  • Number of Flutes - specifies the number of cutting flutes for the tool.

  • Overall Length - set the total length of the tool. This value must be greater than the Protrusion Length.

  • Protrusion Length - sets the distance that the tool protrudes from the tool arbor when a tool holder is assigned to the tool.

  • Tool Number - sets the number to be used in tool callout unless otherwise specified.

  • Tool Material - is the tool material type of the selected tool.
 

 

Tool Holder

 

  • Holder Label - displays the name of the associated tool holder. When blank, no tool holder is associated.

  • Assign/Remove Tool Holder - When no tool holder has been assigned, the Holder Label will be blank, and the button will read: Assign Tool Holder. This will open The Milling Tool Holder Library to allow you to select, or create a tool holder to associate with the selected tool. Once a tool holder has been assigned, the button will read: Remove Tool Holder. This will remove the association between the tool holder and the selected tool.

 

Feeds and Speeds

 

  • Use System Feeds and Speeds

    Select this check box to automatically calculate the feeds and speeds.

    Clear this check box to type feeds and speeds values manually.

  • Spindle Speed/RPM - is the revolutions per minute of the spindle.

  • Plunge Feedrate - is the downward feedrate. This value is linked to the Plunge Feed per Tooth.

 

Custom Geometry

 

  • Assign Tool Geometry - hides the Tool Library and opens the Tool Shape Picking dialog to allow you to select geometry from the graphics area to assign as the shape of the tool. You can learn more about assigning custom tools in the Assigning Custom Tools topic.

Mill

ClosedEndmill Rough

Tool Parameters

 

  • Tool Label - allows you to set, or modify, a tool name.

  • Diameter (1) - sets the diameter of the tool.

  • Flute Length (3) - sets the length of the flute/cutting portion of the tool.

  • Corner Radius - sets the size of the radius on the corner of the endmill.

  • Num Flutes - specifies the number of cutting flutes for the tool.

  • Overall Length - set the total length of the tool. This value must be greater than the Protrusion Length.

  • Protrusion Length - sets the distance that the tool protrudes from the tool arbor when a tool holder is assigned to the tool.

  • Tool Number - sets the number to be used in tool callout unless otherwise specified.

  • Tool Material - is the tool material type of the selected tool.
 

 

Tool Holder

 

  • Holder Label - displays the name of the associated tool holder. When blank, no tool holder is associated.

  • Assign/Remove Tool Holder - When no tool holder has been assigned, the Holder Label will be blank, and the button will read: Assign Tool Holder. This will open The Milling Tool Holder Library to allow you to select, or create a tool holder to associate with the selected tool. Once a tool holder has been assigned, the button will read: Remove Tool Holder. This will remove the association between the tool holder and the selected tool.

 

Feeds and Speeds

 

  • Use System Feeds and Speeds

    Select this check box to automatically calculate the feeds and speeds.

    Clear this check box to type feeds and speeds values manually.

  • Spindle Speed/RPM - is the revolutions per minute of the spindle.

  • Plunge Feedrate - is the downward feedrate. This value is linked to the Plunge Feed per Tooth.

  • Cutting Feedrate - is the feedrate for feed moves.

 

Custom Geometry

 

  • Assign Tool Geometry - hides the Tool Library and opens the Tool Shape Picking dialog to allow you to select geometry from the graphics area to assign as the shape of the tool. You can learn more about assigning custom tools in the Assigning Custom Tools topic.

 

ClosedEndmill Finish

Tool Parameters

 

  • Tool Label - allows you to set, or modify, a tool name.

  • Diameter (1) - sets the diameter of the tool.

  • Flute Length (3) - sets the length of the flute/cutting portion of the tool.

  • Corner Radius - sets the size of the radius on the corner of the endmill.

  • Num Flutes - specifies the number of cutting flutes for the tool.

  • Overall Length - set the total length of the tool. This value must be greater than the Protrusion Length.

  • Protrusion Length - sets the distance that the tool protrudes from the tool arbor when a tool holder is assigned to the tool.

  • Tool Number - sets the number to be used in tool callout unless otherwise specified.

  • Tool Material - is the tool material type of the selected tool.
 

 

Tool Holder

 

  • Holder Label - displays the name of the associated tool holder. When blank, no tool holder is associated.

  • Assign/Remove Tool Holder - When no tool holder has been assigned, the Holder Label will be blank, and the button will read: Assign Tool Holder. This will open The Milling Tool Holder Library to allow you to select, or create a tool holder to associate with the selected tool. Once a tool holder has been assigned, the button will read: Remove Tool Holder. This will remove the association between the tool holder and the selected tool.

 

Feeds and Speeds

 

  • Use System Feeds and Speeds

    Select this check box to automatically calculate the feeds and speeds.

    Clear this check box to type feeds and speeds values manually.

  • Spindle Speed/RPM - is the revolutions per minute of the spindle.

  • Plunge Feedrate - is the downward feedrate. This value is linked to the Plunge Feed per Tooth.

  • Cutting Feedrate - is the feedrate for feed moves.

 

Custom Geometry

 

  • Assign Tool Geometry - hides the Tool Library and opens the Tool Shape Picking dialog to allow you to select geometry from the graphics area to assign as the shape of the tool. You can learn more about assigning custom tools in the Assigning Custom Tools topic.

 

ClosedChamfer Mill

Tool Parameters

 

  • Tool Label - allows you to set, or modify, a tool name.

  • Diameter (1) - sets the diameter of the tool.

  • Angle (2) - sets the angle of the area between the Small Diameter (3)  and the Diameter (1).

  • Sm. Dia. (3)- sets the small diameter of the tool.

  • Number of Flutes - specifies the number of cutting flutes for the tool.

  • Overall Length - set the total length of the tool. This value must be greater than the Protrusion Length.

  • Protrusion Length - sets the distance that the tool protrudes from the tool arbor when a tool holder is assigned to the tool.

  • Tool Number - sets the number to be used in tool callout unless otherwise specified.

  • Tool Material - is the tool material type of the selected tool.
 

 

Tool Holder

 

  • Holder Label - displays the name of the associated tool holder. When blank, no tool holder is associated.

  • Assign/Remove Tool Holder - When no tool holder has been assigned, the Holder Label will be blank, and the button will read: Assign Tool Holder. This will open The Milling Tool Holder Library to allow you to select, or create a tool holder to associate with the selected tool. Once a tool holder has been assigned, the button will read: Remove Tool Holder. This will remove the association between the tool holder and the selected tool.

 

Feeds and Speeds

 

  • Use System Feeds and Speeds

    Select this check box to automatically calculate the feeds and speeds.

    Clear this check box to type feeds and speeds values manually.

  • Spindle Speed/RPM - is the revolutions per minute of the spindle.

  • Plunge Feedrate - is the downward feedrate. This value is linked to the Plunge Feed per Tooth.

 

Custom Geometry

 

  • Assign Tool Geometry - hides the Tool Library and opens the Tool Shape Picking dialog to allow you to select geometry from the graphics area to assign as the shape of the tool. You can learn more about assigning custom tools in the Assigning Custom Tools topic.

 

ClosedCorner-Round

When defining a corner rounding tool, the diameter must be greater than or equal to the small diameter plus twice the corner radius.

 

Diameter >= Small Diameter + (Corner Radius * 2)

 

If you enter values that do not fit this equation, an error message displays.

 

Tip: When defining a corner rounding tool, if the Diameter is greater than the current/default value, set the Diameter value first. This allows you to avoid receiving the error message. If the Diameter is less than the current/default value, set the Corner Radius first to avoid the error message.

 

Tool Parameters

 

  • Tool Label - allows you to set, or modify, a tool name.

  • Diameter (1) - sets the diameter of the tool.

  • Sm. Dia. (2)- sets the small diameter of the tool.

  • Corner Radius (3) - sets the size of the radius on the corner of the endmill.

  • Sm.Dia.Len. (4) - sets the length of the Small Diameter from end of the Corner Radius (3) to beginning of Small Diameter (2).

  • Shaft Dimeter (5) - sets the diameter of the shaft.

  • Num Flutes - specifies the number of cutting flutes for the tool.

  • Overall Length - set the total length of the tool. This value must be greater than the Protrusion Length.

  • Protrusion Length - sets the distance that the tool protrudes from the tool arbor when a tool holder is assigned to the tool.

  • Tool Number - sets the number to be used in tool callout unless otherwise specified.

  • Tool Material - is the tool material type of the selected tool.
 

 

Tool Holder

 

  • Holder Label - displays the name of the associated tool holder. When blank, no tool holder is associated.

  • Assign/Remove Tool Holder - When no tool holder has been assigned, the Holder Label will be blank, and the button will read: Assign Tool Holder. This will open The Milling Tool Holder Library to allow you to select, or create a tool holder to associate with the selected tool. Once a tool holder has been assigned, the button will read: Remove Tool Holder. This will remove the association between the tool holder and the selected tool.

 

Feeds and Speeds

 

  • Use System Feeds and Speeds

    Select this check box to automatically calculate the feeds and speeds.

    Clear this check box to type feeds and speeds values manually.

  • Spindle Speed/RPM - is the revolutions per minute of the spindle.

  • Plunge Feedrate - is the downward feedrate. This value is linked to the Plunge Feed per Tooth.

 

Custom Geometry

 

  • Assign Tool Geometry - hides the Tool Library and opens the Tool Shape Picking dialog to allow you to select geometry from the graphics area to assign as the shape of the tool. You can learn more about assigning custom tools in the Assigning Custom Tools topic.

 

ClosedThread Mill

Tool Parameters

 

  • Tool Label - is the name of the tool.

  • Thread-  displays the thread type and size. Click the button to launch the Thread Type dialog to allow you to change the Thread Type and Thread Size.

  • Diameter (1) - sets the diameter of the tool.

  • Flute Length - sets the length of the flute/cutting portion of the tool.

  • Num Flutes - specifies the number of cutting flutes for the tool.
  • Overall Length - set the total length of the tool. This value must be greater than the Protrusion Length.
  • Protrusion Length (2) - sets the distance that the tool protrudes from the tool arbor when a tool holder is assigned to the tool.

  • Taper Angle (3) - sets the angle of the taper.

  • Pitch - sets the distance from one tooth to the next.

  • Thread Height (4) - is the major diameter, minus the minor diameter, divided by two.

  • Thread Angle (5) - sets the included angle between the thread flanks.

  • Tool Number - sets the number to be used in tool callout unless otherwise specified.

  • Tool Material - is the tool material type of the selected tool.
 

 

Tool Holder

 

  • Holder Label - displays the name of the associated tool holder. When blank, no tool holder is associated.

  • Assign/Remove Tool Holder - When no tool holder has been assigned, the Holder Label will be blank, and the button will read: Assign Tool Holder. This will open The Milling Tool Holder Library to allow you to select, or create a tool holder to associate with the selected tool. Once a tool holder has been assigned, the button will read: Remove Tool Holder. This will remove the association between the tool holder and the selected tool.

 

Feeds and Speeds

 

  • Use System Feeds and Speeds

    Select this check box to automatically calculate the feeds and speeds.

    Clear this check box to type feeds and speeds values manually.

  • Spindle Speed/RPM - is the revolutions per minute of the spindle.

  • Plunge Feedrate - is the downward feedrate. This value is linked to the Plunge Feed per Tooth.

  • Cutting Feedrate - is the feedrate for feed moves.

 

Custom Geometry

 

  • Assign Tool Geometry - hides the Tool Library and opens the Tool Shape Picking dialog to allow you to select geometry from the graphics area to assign as the shape of the tool. You can learn more about assigning custom tools in the Assigning Custom Tools topic.

 

ClosedSingle Point Thread

Tool Parameters

 

  • Tool Label - is the name of the tool.

  • Thread-  displays the thread type and size. Click the button to launch the Thread Type dialog to allow you to change the Thread Type and Thread Size.

  • Diameter (1) - sets the diameter of the tool.

  • Num Flutes - specifies the number of cutting flutes for the tool.
  • Overall Length - set the total length of the tool. This value must be greater than the Protrusion Length.
  • Protrusion Length (2) - sets the distance that the tool protrudes from the tool arbor when a tool holder is assigned to the tool.

  • Pitch - sets the distance from one tooth to the next.

  • Thread Height (3) - is the major diameter, minus the minor diameter, divided by two.

  • Thread Angle (4) - sets the included angle between the thread flanks.

  • Tool Number - sets the number to be used in tool callout unless otherwise specified.

  • Tool Material - is the tool material type of the selected tool.
 

 

Tool Holder

 

  • Holder Label - displays the name of the associated tool holder. When blank, no tool holder is associated.

  • Assign/Remove Tool Holder - When no tool holder has been assigned, the Holder Label will be blank, and the button will read: Assign Tool Holder. This will open The Milling Tool Holder Library to allow you to select, or create a tool holder to associate with the selected tool. Once a tool holder has been assigned, the button will read: Remove Tool Holder. This will remove the association between the tool holder and the selected tool.

 

Feeds and Speeds

 

  • Use System Feeds and Speeds

    Select this check box to automatically calculate the feeds and speeds.

    Clear this check box to type feeds and speeds values manually.

  • Spindle Speed/RPM - is the revolutions per minute of the spindle.

  • Plunge Feedrate - is the downward feedrate. This value is linked to the Plunge Feed per Tooth.

  • Cutting Feedrate - is the feedrate for feed moves.

 

Custom Geometry

 

  • Assign Tool Geometry - hides the Tool Library and opens the Tool Shape Picking dialog to allow you to select geometry from the graphics area to assign as the shape of the tool. You can learn more about assigning custom tools in the Assigning Custom Tools topic.

 

ClosedV-Tool

Tool Parameters

 

  • Tool Label - is the name of the tool.

  • Diameter (1) - sets the diameter of the tool.

  • Included Angle (2) - sets the angle of the tool tip.

  • Flat End Diameter - sets the diameter of the flat portion at the tip of the tool.

  • Flute Length (3) - sets the length of the flute/cutting portion of the tool.

  • Num Flutes - specifies the number of cutting flutes for the tool.
  • Overall Length - set the total length of the tool. This value must be greater than the Protrusion Length.
  • Protrusion Length - sets the distance that the tool protrudes from the tool arbor when a tool holder is assigned to the tool.

  • Tool Number - sets the number to be used in tool callout unless otherwise specified.

  • Tool Material - is the tool material type of the selected tool.
 

 

Tool Holder

 

  • Holder Label - displays the name of the associated tool holder. When blank, no tool holder is associated.

  • Assign/Remove Tool Holder - When no tool holder has been assigned, the Holder Label will be blank, and the button will read: Assign Tool Holder. This will open The Milling Tool Holder Library to allow you to select, or create a tool holder to associate with the selected tool. Once a tool holder has been assigned, the button will read: Remove Tool Holder. This will remove the association between the tool holder and the selected tool.

 

Feeds and Speeds

 

  • Use System Feeds and Speeds

    Select this check box to automatically calculate the feeds and speeds.

    Clear this check box to type feeds and speeds values manually.

  • Spindle Speed/RPM - is the revolutions per minute of the spindle.

  • Plunge Feedrate - is the downward feedrate. This value is linked to the Plunge Feed per Tooth.

  • Cutting Feedrate - is the feedrate for feed moves.

 

Custom Geometry

 

  • Assign Tool Geometry - hides the Tool Library and opens the Tool Shape Picking dialog to allow you to select geometry from the graphics area to assign as the shape of the tool. You can learn more about assigning custom tools in the Assigning Custom Tools topic.

 

ClosedTapered

Tool Parameters

 

  • Tool Label - is the name of the tool.

  • Diameter (1) - sets the diameter of the tool.

  • Flute Length (2) - sets the length of the flute/cutting portion of the tool.

  • Angle (3) - sets the angle of the taper.

  • Corner Radius - sets the size of the radius on the corner of the endmill.

  • Num Flutes - specifies the number of cutting flutes for the tool.
  • Overall Length - set the total length of the tool. This value must be greater than the Protrusion Length.
  • Protrusion Length - sets the distance that the tool protrudes from the tool arbor when a tool holder is assigned to the tool.

  • Tool Number - sets the number to be used in tool callout unless otherwise specified.

  • Tool Material - is the tool material type of the selected tool.
 

 

Tool Holder

 

  • Holder Label - displays the name of the associated tool holder. When blank, no tool holder is associated.

  • Assign/Remove Tool Holder - When no tool holder has been assigned, the Holder Label will be blank, and the button will read: Assign Tool Holder. This will open The Milling Tool Holder Library to allow you to select, or create a tool holder to associate with the selected tool. Once a tool holder has been assigned, the button will read: Remove Tool Holder. This will remove the association between the tool holder and the selected tool.

 

Feeds and Speeds

 

  • Use System Feeds and Speeds

    Select this check box to automatically calculate the feeds and speeds.

    Clear this check box to type feeds and speeds values manually.

  • Spindle Speed/RPM - is the revolutions per minute of the spindle.

  • Plunge Feedrate - is the downward feedrate. This value is linked to the Plunge Feed per Tooth.

  • Cutting Feedrate - is the feedrate for feed moves.

 

Custom Geometry

 

  • Assign Tool Geometry - hides the Tool Library and opens the Tool Shape Picking dialog to allow you to select geometry from the graphics area to assign as the shape of the tool. You can learn more about assigning custom tools in the Assigning Custom Tools topic.

 

ClosedT-Cutter

Tool Parameters

 

  • Tool Label - allows you to set, or modify, a tool name.

  • Diameter (1) - sets the diameter of the tool.

  • Flute Length (2) - sets the length of the flute/cutting portion of the tool.

  • Corner Radius - sets the size of the radius on the corner of the endmill.

  • Shaft Diameter (5) - sets the diameter of the shaft.

  • Num Flutes - specifies the number of cutting flutes for the tool.

  • Overall Length - set the total length of the tool. This value must be greater than the Protrusion Length.

  • Protrusion Length - sets the distance that the tool protrudes from the tool arbor when a tool holder is assigned to the tool.

  • Tool Number - sets the number to be used in tool callout unless otherwise specified.

  • Tool Material - is the tool material type of the selected tool.
 

 

Tool Holder

 

  • Holder Label - displays the name of the associated tool holder. When blank, no tool holder is associated.

  • Assign/Remove Tool Holder - When no tool holder has been assigned, the Holder Label will be blank, and the button will read: Assign Tool Holder. This will open The Milling Tool Holder Library to allow you to select, or create a tool holder to associate with the selected tool. Once a tool holder has been assigned, the button will read: Remove Tool Holder. This will remove the association between the tool holder and the selected tool.

 

Feeds and Speeds

 

  • Use System Feeds and Speeds

    Select this check box to automatically calculate the feeds and speeds.

    Clear this check box to type feeds and speeds values manually.

  • Spindle Speed/RPM - is the revolutions per minute of the spindle.

  • Plunge Feedrate - is the downward feedrate. This value is linked to the Plunge Feed per Tooth.

 

Custom Geometry

 

  • Assign Tool Geometry - hides the Tool Library and opens the Tool Shape Picking dialog to allow you to select geometry from the graphics area to assign as the shape of the tool. You can learn more about assigning custom tools in the Assigning Custom Tools topic.

 

ClosedDove Mill

Tool Parameters

 

  • Tool Label - is the name of the tool.

  • Diameter (1) - sets the diameter of the tool.

  • Flute Length (2) - sets the length of the flute/cutting portion of the tool.

  • Angle (3) - sets the angle of the taper.

  • Corner Radius - sets the size of the radius on the corner of the endmill.

  • Num Flutes - specifies the number of cutting flutes for the tool.
  • Overall Length - set the total length of the tool. This value must be greater than the Protrusion Length.
  • Protrusion Length - sets the distance that the tool protrudes from the tool arbor when a tool holder is assigned to the tool.

  • Tool Number - sets the number to be used in tool callout unless otherwise specified.

  • Tool Material - is the tool material type of the selected tool.
 

 

Tool Holder

 

  • Holder Label - displays the name of the associated tool holder. When blank, no tool holder is associated.

  • Assign/Remove Tool Holder - When no tool holder has been assigned, the Holder Label will be blank, and the button will read: Assign Tool Holder. This will open The Milling Tool Holder Library to allow you to select, or create a tool holder to associate with the selected tool. Once a tool holder has been assigned, the button will read: Remove Tool Holder. This will remove the association between the tool holder and the selected tool.

 

Feeds and Speeds

 

  • Use System Feeds and Speeds

    Select this check box to automatically calculate the feeds and speeds.

    Clear this check box to type feeds and speeds values manually.

  • Spindle Speed/RPM - is the revolutions per minute of the spindle.

  • Plunge Feedrate - is the downward feedrate. This value is linked to the Plunge Feed per Tooth.

  • Cutting Feedrate - is the feedrate for feed moves.

 

Custom Geometry

 

  • Assign Tool Geometry - hides the Tool Library and opens the Tool Shape Picking dialog to allow you to select geometry from the graphics area to assign as the shape of the tool. You can learn more about assigning custom tools in the Assigning Custom Tools topic.

 

ClosedLollipop

Tool Parameters

 

  • Tool Label - allows you to set, or modify, a tool name.

  • Diameter (1) - sets the diameter of the tool.

  • Flute Length (2) - sets the length of the flute/cutting portion of the tool.

  • Shaft Diameter (3) - sets the diameter of the shaft.

  • Num Flutes - specifies the number of cutting flutes for the tool.

  • Overall Length - set the total length of the tool. This value must be greater than the Protrusion Length.

  • Protrusion Length - sets the distance that the tool protrudes from the tool arbor when a tool holder is assigned to the tool.

  • Tool Number - sets the number to be used in tool callout unless otherwise specified.

  • Tool Material - is the tool material type of the selected tool.
 

 

Tool Holder

 

  • Holder Label - displays the name of the associated tool holder. When blank, no tool holder is associated.

  • Assign/Remove Tool Holder - When no tool holder has been assigned, the Holder Label will be blank, and the button will read: Assign Tool Holder. This will open The Milling Tool Holder Library to allow you to select, or create a tool holder to associate with the selected tool. Once a tool holder has been assigned, the button will read: Remove Tool Holder. This will remove the association between the tool holder and the selected tool.

 

Feeds and Speeds

 

  • Use System Feeds and Speeds

    Select this check box to automatically calculate the feeds and speeds.

    Clear this check box to type feeds and speeds values manually.

  • Spindle Speed/RPM - is the revolutions per minute of the spindle.

  • Plunge Feedrate - is the downward feedrate. This value is linked to the Plunge Feed per Tooth.

 

Custom Geometry

 

  • Assign Tool Geometry - hides the Tool Library and opens the Tool Shape Picking dialog to allow you to select geometry from the graphics area to assign as the shape of the tool. You can learn more about assigning custom tools in the Assigning Custom Tools topic.

 

ClosedDrag Knife

Tool Parameters

 

  • Tool Label - allows you to set, or modify, a tool name.

  • Blade Thickness (1) - sets the width of the blade..

  • Blade Offset (2) - sets the distance between the tools center of rotation and the tip of the blade.

  • Protrusion Length (3) - sets the distance that the tool protrudes from the tool arbor when a tool holder is assigned to the tool.

  • Tool Number - sets the number to be used in tool callout unless otherwise specified.

  • Tool Material - is the tool material type of the selected tool.
 

 

Tool Holder

 

  • Holder Label - displays the name of the associated tool holder. When blank, no tool holder is associated.

  • Assign/Remove Tool Holder - When no tool holder has been assigned, the Holder Label will be blank, and the button will read: Assign Tool Holder. This will open The Milling Tool Holder Library to allow you to select, or create a tool holder to associate with the selected tool. Once a tool holder has been assigned, the button will read: Remove Tool Holder. This will remove the association between the tool holder and the selected tool.

 

Feeds and Speeds

 

  • Use System Feeds and Speeds

    Select this check box to automatically calculate the feeds and speeds.

    Clear this check box to type feeds and speeds values manually.

  • Plunge Feedrate - is the downward feedrate. This value is linked to the Plunge Feed per Tooth.

  • Cutting Feedrate - is the feedrate for feed moves.

 

 

ClosedBarrel-Standard

Note: To get a more in depth look at the barrel tool type, see the Barrel Mills topic.

 

Tool Parameters

 

  • Tool Label - allows you to set, or modify, a tool name.

  • Diameter (1) - sets the diameter of the tool.

  • Flute Length (2) - sets the length of the flute/cutting portion of the tool.

  • Profile Radius (3) - sets the main radius of the tool.

  • Corner Radius (4) - sets the size of the radius on the corner of the tool.

  • Shaft Diameter (5) - sets the diameter of the shaft.

  • Num Flutes - specifies the number of cutting flutes for the tool.

  • Overall Length - set the total length of the tool. This value must be greater than the Protrusion Length.

  • Protrusion Length - sets the distance that the tool protrudes from the tool arbor when a tool holder is assigned to the tool.

  • Tool Number - sets the number to be used in tool callout unless otherwise specified.

  • Tool Material - is the tool material type of the selected tool.
 

 

Tool Holder

 

  • Holder Label - displays the name of the associated tool holder. When blank, no tool holder is associated.

  • Assign/Remove Tool Holder - When no tool holder has been assigned, the Holder Label will be blank, and the button will read: Assign Tool Holder. This will open The Milling Tool Holder Library to allow you to select, or create a tool holder to associate with the selected tool. Once a tool holder has been assigned, the button will read: Remove Tool Holder. This will remove the association between the tool holder and the selected tool.

 

Feeds and Speeds

 

  • Use System Feeds and Speeds

    Select this check box to automatically calculate the feeds and speeds.

    Clear this check box to type feeds and speeds values manually.

  • Spindle Speed/RPM - is the revolutions per minute of the spindle.

  • Plunge Feedrate - is the downward feedrate. This value is linked to the Plunge Feed per Tooth.

 

Custom Geometry

 

  • Assign Tool Geometry - hides the Tool Library and opens the Tool Shape Picking dialog to allow you to select geometry from the graphics area to assign as the shape of the tool. You can learn more about assigning custom tools in the Assigning Custom Tools topic.

 

Important: The following rules apply when creating a valid tool shape: 

• Profile radius must be greater than the corner radius
• Diameter must be equal to or greater than the upper diameter

 

ClosedBarrel-Advanced

Note: The Advanced barrel type has several parameters that present a choice on how you would like to define the tool. To get a more in depth look at these options, see the Barrel Mills topic.

 

Tool Parameters

 

  • Tool Label - allows you to set, or modify, a tool name.

  • Flute Height by:
    • Upper Diameter - Shaft Diameter (6)
    • Length - Flute Length (2)

  • Profile Position by (Axial):
    • Distance(M) - Distance(M) (7)
    • Reference Diameter - Diameter (3)

  • Profile Position by (Radial):
    • Distance(M) - Distance(M) (8)
    • Max Diameter - Diameter (1)

  • Corner Radius:
    • None - (No additional value is added to the definition)
    • Corner - Corner Radius (5)
    • Full - (No additional value is added to the definition)

  • Diameter (1) - sets the total diameter of the widest potion of the flute.

  • Flute Length (2) - sets the length of the flute/cutting portion of the tool.

  • Diameter (3) - sets the end diameter at the tool tip. This parameter is to be calculated as if there were no corner radius.

  • Profile Radius (4) - sets the main radius of the tool.

  • Corner Radius (5) - sets the small radius used at the corner of the tool tip.

  • Shaft Diameter (6) - sets the diameter of the shaft.

  • Distance(M) Axial (7) - sets the position of the main radius by defining the height of its center as referrenced from the tool tip.

  • Distance(M) Radial (8) - sets the position of the main radius by defining the distance of its center from the center of the tool.

 

Important: (8): This value will typically be negative, unless the arc and its center are on the same side of the revolved axis. See Barrel Mills.


  • Num Flutes - specifies the number of cutting flutes for the tool.

  • Overall Length - set the total length of the tool. This value must be greater than the Protrusion Length.

  • Protrusion Length - sets the distance that the tool protrudes from the tool arbor when a tool holder is assigned to the tool.

  • Tool Number - sets the number to be used in tool callout unless otherwise specified.

  • Tool Material - is the tool material type of the selected tool.
 

 

Tool Holder

 

  • Holder Label - displays the name of the associated tool holder. When blank, no tool holder is associated.

  • Assign/Remove Tool Holder - When no tool holder has been assigned, the Holder Label will be blank, and the button will read: Assign Tool Holder. This will open The Milling Tool Holder Library to allow you to select, or create a tool holder to associate with the selected tool. Once a tool holder has been assigned, the button will read: Remove Tool Holder. This will remove the association between the tool holder and the selected tool.

 

Feeds and Speeds

 

  • Use System Feeds and Speeds

    Select this check box to automatically calculate the feeds and speeds.

    Clear this check box to type feeds and speeds values manually.

  • Spindle Speed/RPM - is the revolutions per minute of the spindle.

  • Plunge Feedrate - is the downward feedrate. This value is linked to the Plunge Feed per Tooth.

 

Custom Geometry

 

  • Assign Tool Geometry - hides the Tool Library and opens the Tool Shape Picking dialog to allow you to select geometry from the graphics area to assign as the shape of the tool. You can learn more about assigning custom tools in the Assigning Custom Tools topic.

 

Important: The following rules apply when creating a valid tool shape: 

• Diameter must be greater than or equal to the Shaft diameter
• Diameter must be greater than the reference diameter for the barrel mill
• Profile position by (Radial): Distance (M)
          • Profile radius must be greater than the radial distance of the profile
• Profile position by (Axial): Distance (M)
          • Profile radius must be greater than the axial distance of the profile
• Profile position by (Axial): Reference diameter
          • Profile radius must be greater than the radial distance of the profile plus the reference radius
• Flute height by: Upper diameter
          • Profile radius must be greater than the radial distance of the profile plus the upper radius
• Flute height by: Length
          • Profile radius must be greater than flute length minus the axial distance of profile

 

ClosedBarrel-Tangent

Note: To get a more in depth look at the barrel tool type, see the Barrel Mills topic.

 

Tool Parameters

 

  • Tool Label - allows you to set, or modify, a tool name.

  • Diameter (1) - sets the total diameter of the widest potion of the flute.

  • Flute Length (2) - sets the length of the flute/cutting portion of the tool.

  • Profile Radius (3) - sets the main radius of the tool.

  • Corner Radius (4) - sets the small radius used at the corner of the tool tip.

  • Num Flutes - specifies the number of cutting flutes for the tool.

  • Overall Length - set the total length of the tool. This value must be greater than the Protrusion Length.

  • Protrusion Length - sets the distance that the tool protrudes from the tool arbor when a tool holder is assigned to the tool.

  • Tool Number - sets the number to be used in tool callout unless otherwise specified.

  • Tool Material - is the tool material type of the selected tool.
 

 

Tool Holder

 

  • Holder Label - displays the name of the associated tool holder. When blank, no tool holder is associated.

  • Assign/Remove Tool Holder - When no tool holder has been assigned, the Holder Label will be blank, and the button will read: Assign Tool Holder. This will open The Milling Tool Holder Library to allow you to select, or create a tool holder to associate with the selected tool. Once a tool holder has been assigned, the button will read: Remove Tool Holder. This will remove the association between the tool holder and the selected tool.

 

Feeds and Speeds

 

  • Use System Feeds and Speeds

    Select this check box to automatically calculate the feeds and speeds.

    Clear this check box to type feeds and speeds values manually.

  • Spindle Speed/RPM - is the revolutions per minute of the spindle.

  • Plunge Feedrate - is the downward feedrate. This value is linked to the Plunge Feed per Tooth.

 

Custom Geometry

 

  • Assign Tool Geometry - hides the Tool Library and opens the Tool Shape Picking dialog to allow you to select geometry from the graphics area to assign as the shape of the tool. You can learn more about assigning custom tools in the Assigning Custom Tools topic.

 

ClosedBarrel-Lens

Note: To get a more in depth look at the barrel tool type, see the Barrel Mills topic.

 

Tool Parameters

 

  • Tool Label - allows you to set, or modify, a tool name.

  • Diameter (1) - sets the total diameter of the widest potion of the flute.

  • Flute Length (2) - sets the length of the flute/cutting portion of the tool.

  • Convex Tip Radius (3) - sets the main radius of the tool tip.

  • Corner Radius (4) - sets the small radius used at the corner of the tool tip.

  • Num Flutes - specifies the number of cutting flutes for the tool.

  • Overall Length - set the total length of the tool. This value must be greater than the Protrusion Length.

  • Protrusion Length - sets the distance that the tool protrudes from the tool arbor when a tool holder is assigned to the tool.

  • Tool Number - sets the number to be used in tool callout unless otherwise specified.

  • Tool Material - is the tool material type of the selected tool.
 

 

Tool Holder

 

  • Holder Label - displays the name of the associated tool holder. When blank, no tool holder is associated.

  • Assign/Remove Tool Holder - When no tool holder has been assigned, the Holder Label will be blank, and the button will read: Assign Tool Holder. This will open The Milling Tool Holder Library to allow you to select, or create a tool holder to associate with the selected tool. Once a tool holder has been assigned, the button will read: Remove Tool Holder. This will remove the association between the tool holder and the selected tool.

 

Feeds and Speeds

 

  • Use System Feeds and Speeds

    Select this check box to automatically calculate the feeds and speeds.

    Clear this check box to type feeds and speeds values manually.

  • Spindle Speed/RPM - is the revolutions per minute of the spindle.

  • Plunge Feedrate - is the downward feedrate. This value is linked to the Plunge Feed per Tooth.

 

Custom Geometry

 

  • Assign Tool Geometry - hides the Tool Library and opens the Tool Shape Picking dialog to allow you to select geometry from the graphics area to assign as the shape of the tool. You can learn more about assigning custom tools in the Assigning Custom Tools topic.

 

Important: The following rules apply when creating a valid tool shape: 

• Convex Tip Radius must be greater than, or equal to, half of the tool Diameter

 

ClosedBarrel-Taper

Note: To get a more in depth look at the barrel tool type, see the Barrel Mills topic.

 

Tool Parameters

 

  • Tool Label - allows you to set, or modify, a tool name.

  • Diameter (1) - sets the total diameter of the widest potion of the flute.

  • Taper Angle (2) - sets the angle of the tools taper.

  • Flute Length (3) - sets the length of the cutting portion of the tool.

  • Upper Radius (4) - sets the radius used between the taper and the shaft of the tool.

  • Profile Radius (5) - sets the main radius used on the taper portion of the tool.

  • Corner Radius (6) - sets the diameter of the shaft.

  • Flatness Diameter (7) - sets the width of the flat portion on the tool tip.

  • Num Flutes - specifies the number of cutting flutes for the tool.

  • Overall Length - set the total length of the tool. This value must be greater than the Protrusion Length.

  • Protrusion Length - sets the distance that the tool protrudes from the tool arbor when a tool holder is assigned to the tool.

  • Tool Number - sets the number to be used in tool callout unless otherwise specified.

  • Tool Material - is the tool material type of the selected tool.
 

 

Tool Holder

 

  • Holder Label - displays the name of the associated tool holder. When blank, no tool holder is associated.

  • Assign/Remove Tool Holder - When no tool holder has been assigned, the Holder Label will be blank, and the button will read: Assign Tool Holder. This will open The Milling Tool Holder Library to allow you to select, or create a tool holder to associate with the selected tool. Once a tool holder has been assigned, the button will read: Remove Tool Holder. This will remove the association between the tool holder and the selected tool.

 

Feeds and Speeds

 

  • Use System Feeds and Speeds

    Select this check box to automatically calculate the feeds and speeds.

    Clear this check box to type feeds and speeds values manually.

  • Spindle Speed/RPM - is the revolutions per minute of the spindle.

  • Plunge Feedrate - is the downward feedrate. This value is linked to the Plunge Feed per Tooth.

 

Custom Geometry

 

  • Assign Tool Geometry - hides the Tool Library and opens the Tool Shape Picking dialog to allow you to select geometry from the graphics area to assign as the shape of the tool. You can learn more about assigning custom tools in the Assigning Custom Tools topic.

 

Important: The following rules apply when creating a valid tool shape: 

• Taper angle must be greater than 0.1, and less than 89
• Profile Radius must be greater than half of the Diameter
• Corner Radius must be less than half of the Diameter
• Upper Radius must not exceed half of the Diameter

 

ClosedBarrel-Double

Note: To get a more in depth look at the barrel tool type, see the Barrel Mills topic.

 

Tool Parameters

 

  • Tool Label - allows you to set, or modify, a tool name.

  • Diameter (1) - sets the diameter of the tool.

  • Flute Length (2) - sets the length of the flute/cutting portion of the tool.

  • Profile Radius (3) - sets the main radius of the tool.

  • Corner Radius (4) - sets the size of the radius on the corner of the tool.

  • Lower Radius (5) - sets the radius used on the tool tip.

  • Num Flutes - specifies the number of cutting flutes for the tool.

  • Overall Length - set the total length of the tool. This value must be greater than the Protrusion Length.

  • Protrusion Length - sets the distance that the tool protrudes from the tool arbor when a tool holder is assigned to the tool.

  • Tool Number - sets the number to be used in tool callout unless otherwise specified.

  • Tool Material - is the tool material type of the selected tool.
 

 

Tool Holder

 

  • Holder Label - displays the name of the associated tool holder. When blank, no tool holder is associated.

  • Assign/Remove Tool Holder - When no tool holder has been assigned, the Holder Label will be blank, and the button will read: Assign Tool Holder. This will open The Milling Tool Holder Library to allow you to select, or create a tool holder to associate with the selected tool. Once a tool holder has been assigned, the button will read: Remove Tool Holder. This will remove the association between the tool holder and the selected tool.

 

Feeds and Speeds

 

  • Use System Feeds and Speeds

    Select this check box to automatically calculate the feeds and speeds.

    Clear this check box to type feeds and speeds values manually.

  • Spindle Speed/RPM - is the revolutions per minute of the spindle.

  • Plunge Feedrate - is the downward feedrate. This value is linked to the Plunge Feed per Tooth.

 

Custom Geometry

 

  • Assign Tool Geometry - hides the Tool Library and opens the Tool Shape Picking dialog to allow you to select geometry from the graphics area to assign as the shape of the tool. You can learn more about assigning custom tools in the Assigning Custom Tools topic.

 

ClosedBarrel-Section

Note: To get a more in depth look at the barrel tool type, see the Barrel Mills topic.

 

Tool Parameters

 

  • Tool Label - allows you to set, or modify, a tool name.

  • Diameter (1) - sets the total diameter of the widest potion of the flute.

  • Flute Length (2) - sets the length of the flute/cutting portion of the tool.

  • Profile Radius (3) - sets the main radius of the tool.

  • Upper Corner Radius (4) - sets the radius used at the upper corner of the Profile Radius.

  • Lower Corner Radius (5) - sets the radius used at the lower corner of the Profile Radius.

  • Shaft Diameter (6) - sets the diameter of the shaft.

  • Distance(M) Axial (7) - sets the position of the main radius by defining the height of its center as referrenced from the tool tip.

  • Num Flutes - specifies the number of cutting flutes for the tool.

  • Overall Length - set the total length of the tool. This value must be greater than the Protrusion Length.

  • Protrusion Length - sets the distance that the tool protrudes from the tool arbor when a tool holder is assigned to the tool.

  • Tool Number - sets the number to be used in tool callout unless otherwise specified.

  • Tool Material - is the tool material type of the selected tool.
 

 

Tool Holder

 

  • Holder Label - displays the name of the associated tool holder. When blank, no tool holder is associated.

  • Assign/Remove Tool Holder - When no tool holder has been assigned, the Holder Label will be blank, and the button will read: Assign Tool Holder. This will open The Milling Tool Holder Library to allow you to select, or create a tool holder to associate with the selected tool. Once a tool holder has been assigned, the button will read: Remove Tool Holder. This will remove the association between the tool holder and the selected tool.

 

Feeds and Speeds

 

  • Use System Feeds and Speeds

    Select this check box to automatically calculate the feeds and speeds.

    Clear this check box to type feeds and speeds values manually.

  • Spindle Speed/RPM - is the revolutions per minute of the spindle.

  • Plunge Feedrate - is the downward feedrate. This value is linked to the Plunge Feed per Tooth.

 

Custom Geometry

 

  • Assign Tool Geometry - hides the Tool Library and opens the Tool Shape Picking dialog to allow you to select geometry from the graphics area to assign as the shape of the tool. You can learn more about assigning custom tools in the Assigning Custom Tools topic.

 

Important: The following rules apply when creating a valid tool shape: 

• Upper Corner Radius must be smaller than the Flute Length
• Lower Corner Radius must be smaller than the Flute Length
• Upper Corner Radius must be smaller than the Profile Radius
• Lower Corner Radius must be smaller than the Profile Radius
• Distance(M) Axial must be lower than the Flute Length
• Profile Radius must be greater than half of the Diameter
• Profile Radius must be greater than Distance(M) Axial
• Diameter must be greater than the Shaft Diameter

 

Turning

ClosedLathe Rough / Finish / Boring

 

Tool

 

  • Tool Label - adds a name to the tool, in the tool list, that allows you to easily identify the tool.

  • Tool Number - sets the assigned tool number

  • Offset Register - sets the register on the machine that stores the diameter offset values for the tool.

 

Insert

 

Note: The following Parameters section differs depending on whether the System Shape or the Custom Shape radio button is selected. Below you will find a separate Parameters section for each option.

 

  • System Shape - uses the following parameters to set the shape designation of the insert.

 

Parameters

 

• Shape - dictates the shape designation of the insert.   • Clearance - dictates the clearance designation of the insert.
Code Letter Description Diagram Nose Angle

 

80° Diamond

80°

D

55° Diamond

55°

E

75° Diamond

75°

M

86° Diamond

86°

R

Round

Full Radius

S

Square

90°

T

Triangle

60°

V

35° Diamond

35°

W

Trigon

80°
 
Code Letter Diagram Clearance Angle

N

0°

A

3°

B

5°

C

7°

P

11°

D

15°

E

20°

F

25°

G

30°

 

  • Tolerance - sets the tolerance designation of the insert. This does not affect toolpath or output.

  • Type - sets the type designation of the insert. This does not affect toolpath or output.

 

• Reference Point - allows you to choose an alignment of the reference point to the insert.

Corner

Tip

Center


  • Nose Radius - sets the radius of the tool nose.

  • IC Diameter - sets the internal circumference of the insert.

  • Thickness - dictates the distance between the front cutting edge to the back of the insert.


 

  • Custom Shape - allows you to select geometry from the graphics area to define the shape of the insert.

 

Parameters

 

  • Assign Tool Insert - When Custom Shape is selected, clicking the Assign Tool Insert button will hide the Tool Library and allow you to select Tool Insert geometry, as seen below, from the graphics area.

Important: When assigning insert geometry, be sure to have the reference point defined as a point, and any interior geometry drawn as a dotted line as shown. For more information, see the Assigning Lathe Tool Inserts topic.

 

  • Nose Radius - sets the radius of the tool nose.

  • IC Diameter - sets the internal circumference of the insert.

  • Thickness - dictates the distance between the front cutting edge to the back of the insert.

 

Holder

 

  • Edit Tool Holder - will launch the Tool Holder Definition dialog box to allow you to specify measurements for the holder, or select geometry from the Workspace in order to define the holder.

 

Feeds and Speeds

 

  • Use Manual Feeds and Speeds

    - Default Feeds and Speeds are used.

    - Selecting this check box will give you access to the following parameters. These will allow you to set specific Feeds and Speeds for the insert. When the insert is used in the Lathe Wizard, these will be the values that are automatically entered for the tool.

  • RPM - sets the feeds and speeds to revolutions per minute.

     

  • CSS - sets the feeds and speeds to a constant surface speed.

    • Maximum RPM - sets the limits of the spindle speed in the posted NC program.

    • Spindle RPM/SFM - sets the spindle speed for the feature in revolutions per minute or the surface feet per minute based on the selected RPM/CSS option.

    • Feedrate - sets the feedrate for the feature.

 

 

ClosedLathe Groove / Cutoff

 

Tool

 

  • Tool Label - adds a name to the tool, in the tool list, that allows you to easily identify the tool.

  • Tool Number - sets the assigned tool number

  • Offset Register - sets the register on the machine that stores the diameter offset values for the tool.

 

Insert

 

Note: The following Parameters section differs depending on whether the System Shape or the Custom Shape radio button is selected. Below you will find a separate Parameters section for each option.

 

  • System Shape - uses the following parameters to set the shape designation of the insert.

 

Parameters

 

  • Tool Width - sets the width of the insert.

  • Tool Length - sets the length of the insert.

  • Side Angle - sets the side angle of the insert.



  • Tip Angle - sets the tip angle of the insert.



  • Reference Point - allows you to choose an alignment of the reference point to the insert, as seen below:

 

Left Corner

Tip

Right Corner

 


  • Nose Radius - sets the radius between the side and bottom of the insert.

  • Thickness - dictates the distance between the front cutting edge to the back of the insert.


 

  • Custom Shape - allows you to select geometry from the graphics area to define the shape of the insert.

 

Parameters

 

  • Assign Tool Insert - When Custom Shape is selected, clicking the Assign Tool Insert button will hide the Tool Library and allow you to select Tool Insert geometry, as seen below, from the graphics area.

Important: When assigning insert geometry, be sure to have the reference point defined as a point. For more information, see the Assigning Lathe Tool Inserts topic.

 

  • Tool Nose Radius - sets the radius of the tool nose.

  • Thickness - dictates the distance between the front cutting edge to the back of the insert.

 

Holder

 

  • Edit Tool Holder - will launch the Tool Holder Definition dialog box to allow you to specify measurements for the holder, or select geometry from the Workspace in order to define the holder.

 

Feeds and Speeds

 

  • Use Manual Feeds and Speeds

    - Default Feeds and Speeds are used.

    - Selecting this check box will give you access to the following parameters. These will allow you to set specific Feeds and Speeds for the insert. When the insert is used in the Lathe Wizard, the values below will be the values that are automatically entered for the tool.

  • RPM - sets the feeds and speeds to revolutions per minute.

     

  • CSS - sets the feeds and speeds to a constant surface speed.

    • Maximum RPM - sets the limits of the spindle speed in the posted NC program.

    • Spindle RPM/SFM - sets the spindle speed for the feature in revolutions per minute or the surface feet per minute based on the selected RPM/CSS option.

    • Feedrate - sets the feedrate for the feature.

 

Parameters

 

  • Home Position Z - sets the Home Position in Z for the tool.

  • Home Position X - sets the Home Position in X for the tool.

  • Reverse Sign

    - With this check box cleared, the output of the X value maintains its default behavior. A move toward the center of rotation will be output as a negative move and a move away from the center of rotation a positive move.

    - With this check box selected, the output of the X value reverses. A move toward the center of rotation will be output as a negative move and a move away from the center of rotation a positive move.

 

 

ClosedLathe Thread

Shape: LayDown Shape: Top Notch

 

Tool

The Tool data differs slightly based on the Shape chosen.

 

  • Tool Label - adds a name to the tool, in the tool list, that allows you to easily identify the tool.

  • Tool Number - sets the assigned tool number

  • Offset Register - sets the register on the machine that stores the diameter offset values for the tool.

 

Insert

 

Note: The following Parameters section differs depending on whether the System Shape or the Custom Shape radio button is selected. Below you will find a separate Parameters section for each option.

 

  • System Shape - uses the following parameters to set the shape designation of the insert.

 

Parameters

 

  • Shape - sets the shape designation of the insert.

 

Lay Down

Top Notch

 

  • Tool Angle - sets the angle of the insert.

 

Lay Down

Top Notch

 

  • Tip Height - sets the tip height of the insert when the Lay Down Shape is selected.

  • Height - sets the height of the insert when the Top Notch Shape is selected.

  • Width - sets the width of the insert when the Top Notch Shape is selected.

 

  • Reference Point - allows you to choose an alignment of the reference point to the insert.

 

Reference Point: Corner   Reference Point: Tip
Lay Down

Top Notch

  

Lay Down

 Top Notch

 

 

  • Tool Nose Radius - sets the radius of the tool nose.

  • IC Diameter - sets the internal circumference of the insert when the Lay Down Shape is selected.

  • Thickness - dictates the distance between the front cutting edge to the back of the insert.

 

  • Custom Shape - allows you to select geometry from the graphics area to define the shape of the insert.

 

Parameters

 

  • Assign Tool Insert - When Custom Shape is selected, clicking the Assign Tool Insert button will hide the Tool Library and allow you to select Tool Insert geometry, as seen below, from the graphics area.

Important: When assigning insert geometry, be sure to have the reference point defined as a point, and any interior geometry drawn as a dotted line as shown. For more information, see the Assigning Lathe Tool Inserts topic.

 

  • Nose Radius - sets the radius of the tool nose.

  • IC Diameter - sets the internal circumference of the insert.

  • Thickness - dictates the distance between the front cutting edge to the back of the insert.

 

Holder

 

  • Edit Tool Holder - will launch the Tool Holder Definition dialog box to allow you to specify measurements for the holder, or select geometry from the Workspace in order to define the holder.

 

Feeds and Speeds

 

  • Use Manual Feeds and Speeds

    - Default Feeds and Speeds are used.

    - Selecting this check box will give you access to the following parameters. These will allow you to set specific Feeds and Speeds for the insert. When the insert is used in the Lathe Wizard, the values below will be the values that are automatically entered for the tool.

  • RPM - sets the feeds and speeds to revolutions per minute.

     

  • CSS - sets the feeds and speeds to a constant surface speed.

    • Maximum RPM - sets the limits of the spindle speed in the posted NC program.

    • Spindle RPM/SFM - sets the spindle speed for the feature in revolutions per minute or the surface feet per minute based on the selected RPM/CSS option.

    • Feedrate - sets the feedrate for the feature.

 

Parameters

 

  • Home Position Z - sets the Home Position in Z for the tool.

  • Home Position X - sets the Home Position in X for the tool.

  • Reverse Sign

    - With this check box cleared, the output of the X value maintains its default behavior. A move toward the center of rotation will be output as a negative move and a move away from the center of rotation a positive move.

    - With this check box selected, the output of the X value reverses. A move toward the center of rotation will be output as a negative move and a move away from the center of rotation a positive move.

 

Related Topics

The CAM Overview

The Mill Turn Tool Crib

The Tool Library Functionality

Next Topic

Once the Tool variables have been set, clicking Next>> will take you to the next page of the given operation. To move the appropriate next topic, click the type of feature that has been chosen below and then the link for the desired operation.

 

ClosedHole Wizards

 

Center Drill Parameters

Drill Operation Parameters

Chamfer Drill Parameters

Chamfer Mill Patterns

Ream Parameters

Bore Parameters

Rolling Tap Parameters

Counterbore Drill Parameters

Counterbore Mill Parameters

Tap Parameters

Rolling Tap Parameters

 

ClosedMill Facing Feature

 

Facing Patterns

 

Closed2 Axis Feature

 

Profile Rough Patterns

Profile Finish Patterns

Pocket Patterns

Facing Patterns

Engrave Parameters

Chamfer Mill Patterns

Plunge Rough (2 Axis) Patterns

Corner Rounding Patterns

 

Closed3 Axis Feature

 

Closed3 Axis Standard

 

Z Level Rough Patterns

Z Level Finish Patterns

Planar Patterns

Spiral Patterns

Radial Patterns

Plunge Rough Patterns

 

Closed3 Axis Pro

 

Advanced Rough Patterns

Flatlands Parameters

Equidistant Patterns

Pencil Parameters

Advanced Planar Patterns

Project Curves Patterns

Advanced Z Level Finish Patterns

 

Closed4 Axis Rotary

 

4 Axis Rotary Patterns

 

ClosedMill Thread

 

Mill Thread Pattern

 

Closed3 Axis Wireframe

 

3 Axis Wireframe Parameters

 

ClosedV-Carve

 

Tapered Pocketing Parameters

V-Varve Finishing Parameters

 

 

ClosedLathe End Face and Turning

 

Rough Patterns

Basic Finish Patterns

Pattern Repeat Patterns

 

ClosedLathe Groove

 

Groove Rough Patterns

Groove Finish Patterns

 

ClosedLathe Thread

 

Thread Parameters

 

ClosedLathe Cutoff

 

Cutoff Parameters

 

ClosedLathe Stock Handling

 

Stock Handling Parameters