Spun Profile

Introduction

This topic will explain the Spun Profile function, and the optionsfound in it.This topic will also provide quick steps on how to use it, and provide links to related topics.

The Spun Profile Function

The Spun Profile function is used to pull an overall profile from asurface or solid that is revolved around a particular axis.

Part

Spun Profile

To open Spun Profile:

  • In the Utilities group, of the Create 2D ribbon,click Spun Profile.

The parameters display in the Data Entry Manager.

The Data Entry Parameters

Selected Geometry

 

(Move Up) - Move the highlighted item up the list.

(Move Down) - Moves the highlighted item down the list.

(Delete) - removes the highlighted item from the list.

(Delete All)- removes all entities from the list.

This list box will show the entities currently selected for the function.

  • Tolerance- sets the amount of variation allowed when creating a Spun Profile.

  • Arc Fit- creates arcs where possible based on the tolerance selected.Clearing this check box will produces lines only.

Axis

  • Pick Axis - the axis will be defined manually, with an existing axis, or a defined vector.
    Pick Axis - the axis will be defined by selecting a line, or surface edge.

Tip: When theselected geometry to pull the spun profile from is parallel to an X, Y, or Z axis, using Pick Axis is notnecessary.When it is askew of an axis, Pick Axis makes it simple.See the images below for a situational example of each.

The following parameters vary depending on the Pick Axis option that is chosen:

Pick Axis

  • Along X Axis - sets the X axis as the axis to unwrap from.
  • Along Y Axis - sets the Y axis as the axis to unwrap from.
  • Along Z Axis - sets the Z axis as the axis to unwrap from.
  • Customized Axis - allows for a custom axis to used for the axis to unwrap from.

Pick Axis

Rotation Axis

 

(Delete) - removes the highlighted item from the list.

The list box will list the entity currently selected for the function.

Note: The direction definesthe vector of the rotation.The direction values are always visible, but can only be edited when Pick Axis is not selected, and the Customized Axis option is chosen.When it is, type in the desired values in the X,Y, Z boxes to define the direction from the Origin Point.


  • Origin X - sets the X value for the center of rotation.
  • Origin Y - sets the Y value for the center of rotation.
  • Origin Z - sets the Z value for the center of rotation.

  • Direction X - lists the x value for the vector of the rotational axis.
  • Direction Y - lists the y value for the vector of the rotational axis.
  • Direction Z - lists the z value for the vector of the rotational axis.

  • OK - finalizes the function.

  • Cancel - exits the function.

Quick Steps - Spun Profile

  1. Open the function, and enter a "1"in the X, Y, or Z Direction box in the Data Entry Manager.

  2. Select the surface or surfaces to pull theSpun Profile from.

  3. Confirm the selection.(You can click OK,or press Spacebar.)

  4. To close the function, click Cancel.

Important: Inthe images below, you will see a solid and the three different Spun Profileresults that were pulled from it.Entering a value in the Y Directionproduces the profile labeled Y. Entering a value in the X Direction producesthe profile labeled X. Entering a value in the Z Direction produces theprofile labeled Z.

Solid

3 results

Related Topics

The CADOverview