Turning Tool Mounting Orientation Reference
Introduction
This topic provides a reference to the possible mounting orientations that can be used in the Mill Turn Tool Crib when mounting a turning tool to a tool device of a mill-turn machine.
Mounting Orientation Reference Tables
Tool Crib Mounting Orientation Reference |
|||
Mounting Orientation 1 |
Mounting Orientation 2 |
Mounting Orientation 3 |
Mounting Orientation 4 |
|
|
|
|
Mounting Orientation 5 |
Mounting Orientation 6 |
Mounting Orientation 7 |
Mounting Orientation 8 |
|
|
|
|
Upper Turret Mounting Reference |
|||
Insert Orientation |
Mounting Orientation |
Most Common |
Other Possible |
1 |
1, 5 |
|
|
2 |
2, 6 |
|
|
3 |
3, 7 |
|
|
4 |
4, 8 |
|
|
Lower Turret Mounting Reference |
|||
Insert Orientation |
Mounting Orientation |
Most Common |
Other Possible |
1 |
1, 5 (4, 8) |
|
|
2 |
2, 6 (3, 7) |
|
|
3 |
3, 7 (2, 6) |
|
|
4 |
4, 8 (1, 5) |
|
|
Milling Spindle/Head Mounting ReferenceThis table is based on machines where the zero degree location for the milling spindle aligns it to the Z-axis.
|
|||
Insert Orientation |
Mounting Orientation |
Orientation |
B Axis Angle |
1 |
8 |
|
90 |
2 |
5 |
|
90 |
3 |
3 |
|
0 |
4 |
8 |
|
0 |