Cube

Introduction

This topic will explain the Cube function, will explain where to find the function, and explain the options found in it. This topic will also give a brief description of Dynamic Drawing, the Snap Increment function, explain creation with quick steps, and provide links to related topics.

The Cube Function

The Cube function creates solid cube primitives. Dynamic Drawing allows you to use sketch handles to modify the location and dimensions of the solid, which can also be defined using data entry. The benefit of Dynamic Drawing is that both methods can be utilized at any time during creation. You can use the sketch handles to roughly define the solid geometry and then use data entry to accurately update the location and dimensions as needed.

 

 

Dynamic Drawing

This function supports Dynamic Drawing which allows you to use a combination of sketching and data entry to create the entities. Prior to confirming the desired result in the function, an adjustable preview is visible. These previews can be modified using the sketch handles, data entry, or a combination of both. The benefit of Dynamic Drawing is that you can quickly place and adjust the size to get the approximate result, and then use data entry to update to the exact dimensions, and coordinate values as needed.

 

Preview with Sketch Handles

Final Entities

 

In the images above, we see the preview of entities which can be adjust with sketch handles, followed by those same entities after they are finalized.

Snap Increment

This function support the use of the snap increment when selecting the location of the entities. The snap increment allows you to get precise results when using mouse selection and helps to reduce data entry modifications.

 

To learn more, view Snap Increment.

To open Cube:

 

  • In the Primitives group, of the Create 3D tab, click Cube.

 

The Cube parameters display in the Data Entry Manager.

The Data Entry Parameters

The following values can be set using either data entry or the sketch handles. The snap increment applies to when using the sketch handles.

 

Parameters

 

  • Length (X) - sets the length or X Axis dimension of the cube.
  • Width (Y) - sets the width or Y Axis dimension of the cube.
  • Height (Z)- sets the height or Z Axis dimension of the cube.

 

 

Reference Location

The solid cube function allows you to set the origin of the cube to the Centeror Bottom Left corner of the cube. The XYZ coordinates determine the location of the selected origin/reference location.

 

Origin

The origin determines the coordinate location using the XYZ coordinates of the Active UCS. You can set the origin location using either data entry or the origin sketch handle. The snap increment applies when using the origin handle.

 

  • X - is the X Axis location of the entity origin.
  • Y - is the Y Axis location of the entity origin.
  • Z - is the Z Axis location of the entity origin.

 

 

Important: The XYZ coordinates are in reference to the Active UCS, or user coordinate system.

 

  • OK - confirms the current settings to create the entity as shown in the CAD preview.
  • Cancel - closes the function.

Quick Steps - Cube

  1. Open the function and define all Data Entry parameters for the entity.

  2. Use any combination of data entry or sketch handles to determine the size and location of the entity.

    You can modify the snap incrementvalue or turn it off if you are using sketch handles.

    To learn more about Dynamic Drawing, view Dynamic Drawing for Solids.

  3. To create the entity as shown in the CAD preview, in the Data Entry tab, click OK.

    To create another entity, repeat steps 2 and 3.

  4. To close the function when you are finished, click Cancel.

 

The feature is added to the CAD Tree.

Related Topics

The CAD Overview