Trim Two Entities

Introduction

This topic will explain the Trim Two Entities function, and the options found in it. This topic will also describe where to find the function, provide quick steps and an example on how to use it, and provide links to related topics.

The Trim Two Entities Function

The Trim Two Entities function is used to trim or extend two entities so they end at a common intersection. To perform the function, you select geometry in the graphics area.

To open Trim Two Entities:

In the Trim Extend group of the Utilities ribbon, click Trim Two Entities.

The parameters display in the Data Entry Manager.

The Data Entry Parameters

Trim/Extend Option

Entity Selection

First Entity

	(Delete) - removes the highlighted item from the list.
The list box will list the entity currently selected for the function.

Second Entity

	(Delete) - removes the highlighted item from the list.
This list box will show the entity currently selected for the function.

OK - has no use with this function.
Cancel - cancels the function when finished.

Quick Steps - Trim Two Entities

Open the function.

The First Entity list automatically has focus.
Select the first entity.

The entity is added to the First Entity list.

The Second Entity list is automatically given focus.
Hover over the second entity to see a preview of the result.

Select the second entity.

The function is automatically executed.

The First Entity list is automatically give back focus to allow the function to be repeated.
Click Cancel to close the function.

Example

The Trim/Extend Two Entities function is used to trim or extend two wireframe entities to their intersection. The term intersectionhere refers to either the actual intersection of the entities or the theoretical intersection. An example of each is shown. When using the function, you select two entities to trim or extend by selecting the portion of each entity that you want to keep. You can trim arcs, lines, or splines, and you can extend lines or arcs, but not splines. The following example explains the steps to use the function.

In the Trim Extend group of the Utilities ribbon, click Trim Two Entities.

The Trim Two Entities parameters display in the Data Entry Manager.

The first step is to select the first entity that you want to trim. What is important here is that you select the side of the entity that you want to keep. The following image shows the entities used for this example.
In the graphics area, point to the entity that you want to trim so that it changes to the Highlight color. While the entity is displayed in the Highlight color, click to select it. Be sure to select the part of the entity that you want to keep.

After you click the entity to trim, the entity is added to the First Entity list in the Data Entry Manager, and is displayed in the Selection color.

The Second Entity list is automatically given focus.
The next step is to select the second entity to trim. In the graphics area, point to the second entity.

Notice that the entire line is shown in the Highlight color, and the portion to be kept is displayed in the Previewcolor. This is the CAD preview that shows how the entity will be trimmed when you select it. If you point to the right side of the line, the colors are reversed.
Click to select the second entity.

The two entities are trimmed to their point of intersection, and the focus is placed back in the First Entity list allowing you to repeat the process.

Entities can be extended using the same process.
Click to select the first entity to extend.

The item is added to the First Entity list. The entity can be removed from the list by selecting the delete button next to the list.
Pointing to the second entity displays the preview.

Click the second entity to perform the function.
To end the function, in the Data Entry tab, click Cancel.

Note: The Trim Extend Two Entities function can be used with all wireframe entities, not just lines. Keep in mind that splines can be trimmed, but not extended.

This concludes the example.