Workpiece

Introduction

This topic explains how to assign workpiece geometry for CAM jobs in BobCAD-CAM. This allows you to assign geometry that represents the workpiece, or the final part, to determine what displays in simulation window as the workpiece. This topic will also provide links to related topics.

 

Note: You do not have to assign a workpiece. To skip the workpiece assignment, just click the next button () to keep going through the Stock Wizard. If you do not assign a workpiece, all visible solid and surface geometry in the graphics area is passed to simulation as the workpiece geometry.Also, if you do assign a workpiece and that geometry is hidden when you launch simulation, no workpiece displays and the Workpiece button becomes unavailable in the simulation.

Method 1) Assigning the Workpiece During the Job Setup

When you click the Stock Wizard button Wizard from the Machining Job dialog box, the Workpiece dialog displays in the DataEntry Manager as the first page of the Stock Wizard.

 

1. The Selected Geometry Body list box automatically has focus. This allows you to select the desired workpiece from the graphics area.
   
   Click or drag a window to select the workpiece geometry, which is the target part.
   
   The Geometry is added to the SelectedGeometry Body list.
   
   
2. Click to begin the Stock Wizard.
   
   
3. If you select the wrong geometry, either click the geometry in the graphics area again to deselect it, highlight it in the list and click (Delete), or click (Delete All) to remove everything from the list.

 

Note: You can also modify the workpiece assignment, after completing the Stock Wizard, using the CAM Tree.

Method 2) Assigning Workpiece Geometry Using the CAM Tree

After creating a CAM job, you can assign workpiece geometry or modify the current assignment using the Workpiece item in the CAM Tree.

 

1. In the CAM Tree, right-click Workpiece,and click Re/Select.

 

Note: You can click Remove if you only want to remove the current assignment.

 

2. The Workpiece dialog displays in the Data Entry Manager.
   
   If geometry is already selected for the workpiece, you can click or drag a window to deselect the unwanted geometry or delete it directly from the Selected Geometry list.
   
   If geometry has not yet been added, Click or drag a window to select the workpiece geometry to add it to the SelectedGeometry Body list.
   
   
3. ClickOKto confirm the selection.
   
   When you simulate the program, only the assigned geometry is passed to simulation as the workpiece.

Related Topic

Getting Started With Simulation

Next Topic

Once you are ready to go to the Stock Definition page, click .