Edit Toolpath - Modify Attributes

Introduction

This topic explains the Parameters available when the Modify Attributes Command Mode, which allows you to modify the feedrate, or feed type, is used. As explained in the Edit Toolpath Dialog topic, most of the Edit Toolpath dialog remains the same, no matter which Command Mode is being used. It is the Parameters of the Modify Attributes Command Mode this topic focuses on, although, the Command Mode group, Selected Toolpath Elements group and the Animation group can still be revisited in this topic by expanding the drop down hot spots of the same name.

 

To work through an example utilizing this function, see the Edit Toolpath Example - Modify Attributes.

 

Actions

Command Mode

 

  • Delete - allows you to delete toolpath entities and relink the toolpath.

  • Trim and Relink - allows you to create a trimming boundary to trim portions of the toolpath away.

  • Move - allows you to alter the location of the selected toolpath elements.

  • Replace - allows you to draw in your own toolpath and replace entities of the toolpath with this CAD geometry.

  • Break - allows you to split toolpath entities into multiple segments.

  • Modify Attributes - allows you to modify the feedrate, or feed type.

  • Extend Cut Move - allows you to extend the toolpath tangentially by a specified distance.

  • Edit Tool Axis - Gives you the option to modify the tool orientation vector for a the selected toolpath elements.

  • Preview

    - Active by default, the Preview option will show the change that will be attained when the Execute button is selected.

    - Clearing this check box will remove the preview of the current settings from the graphics area.


 

Selected Toolpath Elements

This list shows the currently selected toolpath entities.

 

Important: When an operation consists of more than 2500 toolpath entities, the window and polygon picking is disabled to prevent an overload of memory usage.

 

  • Click or Drag Window Pick - This selection method allows you to select toolpath entities in several ways:

 

      1. Use a single click to select individual toolpath entities.
      2. Use Shift+Click on an entity to select an entire chain of entities.  
      3. Use a Window Selection method to drag a window around a group of entities to select at once.

  • Polygon Pick - This selection method will allow you to define an area of selection by using multiple single clicks to define a polygon. An example of this can be seen in the image below.

 

 

  • Point Pick

    - with this check box cleared toolpath points will not selectable.

    - with this check box enabled, toolpath points can be selected, by clicking near the end of a toolpath entity.

  • Convert Selected Toolpath to CAD Geometry - This button will create CAD geometry on a 3D Sketch in the Feature Manager Design Tree.

Note: The Convert Selected Toolpath to CAD Geometry option is currently limited to 100 entities at a time.

 

 

Parameters

 

  • Type -allows you to alter the feedrate of the selected toolpath entities. Choose between:

    • Rapid - converts the selected toolpath element(s) to a rapid move.

    • Plunge Feed - assigns the selected toolpath element(s) the plunge feedrate of the operation.

    • Cutting Feed - assigns the selected toolpath element(s) the cutting feedrate of the operation.

    • User Defined - allows you to enter a specific value to use as the feedrate for the selected toolpath element(s).

  • Feedrate - When the User Defined type is selected, this will allow you to enter a specific speed to use for the selected toolpath elements.

  • Apply to All - assigns the selected feedrate to all toolpath elements in the Selected Toolpath Element list, once executed.

 


 

  • Undo - This will remove the previously executed command.

  • Execute - This will perform the currently active command.

  • Redo - This will re-apply any commands that were removed by the use of the undo button.

 

Note: The Undo and Redo options only affect commands that were executed in the current instance of the Toolpath Editor.

 

 

Animation

The animation will allow you view the tool in the graphics area in order to verify the current tool movement. Controls are available to change how the tool is viewed, adjust the speed of the animation, reset the animation, along with the usual play, pause, fast back, step back, step forward and fast forward.

 

  • Animation

    - with this check box cleared, the view of the tool in the graphics area will be disabled.

    - with this check box selected, the view of the tool in the graphics area will be enabled.

  • Shaded - will show an opaque tool.

  • Transparent - will show a transparent tool.

  • Wireframe - will show the tool as a wireframe.

  • Speed   - This slider affects how quickly the  tool goes through the toolpath in the animation.

  • Reset - Sets the tool back to the beginning of the toolpath.

  • Fast Back - Skips backwards from the current position at 2X the setting of the speed slider.

  • Step Back - Moves the tool backwards along the toolpath by one entity.

  • Play - Starts the animation of the tool moving through the toolpath.

  • Pause - After pressing play, the Play button changes to the Pause button to stop the tool at the current.

  • Step Forward - Moves the tool forwards along the toolpath by one entity.

  • Fast Forward - Skips forwards from the current position at 2X the setting of the speed slider.

 

Related Topics

Edit Toolpath Delete

Edit Toolpath Trim and Relink

Edit Toolpath Move

Edit Toolpath Replace

Edit Toolpath Break

Edit Toolpath Extend Cut Move

Edit Toolpath Edit Tool Axis