Getting Started with Posting

Introduction

After creating all the toolpath to machine your part, the final step of using BobCAD-CAM is to output the NC program and get it to the machine. This topic provides an overview of how to generate your NC programs. It is helpful to know that this process is the same for all CAM Jobs, regardless of the type.

NC Program Creation

After simulating and confirming the desired result, you are ready to post the NC program. It is important to understand that the NC program is created using the post processor file that is assigned to the machine. The default post processor for each machine is defined in Current Settings and can be modified from the CAM Tree.

How to Access Current Settings

To open the Current Settings dialog box:

• Right-click CAM Defaults, and click Current Settings.

Tip: This method selects the Current Settings Default (for system default settings). You can also access the Current Settings Job (for the current job only) by right-clicking Milling Job instead of CAM Defaults.

• Click Posting, and notice the NC File Path. (The machine is selected in Machine Parameters.)

Many important Posting settings, such as the program number, subprogram selection, and more are defined in the Current Settings. For more help, view the BobCAD-CAM Help System.

How to Post

To create the NC program for any CAM job, do one of the following:

• Right-click the CAM Job folder, and click Post.

This option creates the NC program in the location defined in Current Settings.

• Right-click the CAMJob folder, and click Post & Save As.

This option allows you to specify the name and location to which the NC program is saved.

Note: These options can also be accessed in the quick access toolbar at the top of the CAM Tree Manager, and in the NC Code group of the Contextual CAM ribbons.

The Posting Manager

When you post a program in BobCAD-CAM, the NC program also displays in the Posting Manager.

The Posting Manager allows you to view the code, and you can open it in the NC Editor.

The NC Editor and RS232 Communication (DNC)

To edit the NC program:

• Right-click in the Posting window, and click NC Editor.

This launches the editor with the NC program. The editor allows you to edit the code, setup RS232 communications (DNC), and even backplot the program (Editor Pro), which allows you to simulate exactly what the code is going to do on the actual machine.

Go Cut Parts

Now that you have the finished NC program, you can get it to the machine using any method you prefer. You can use the DNC capabilities for RS232 communication from within the editor, or any available storage medium (flash drive, hard drive, or floppy disk), to transport the code to the machine controller.

Happy Cutting!

Next Topic

Congratulations! You have reached the end of this demonstration. To learn about another module, view the Getting Started Introduction.