Creating Revolved Stock

Introduction

In this example you learn how to create stock by revolving wireframe geometry. This example will also provide links to related topics.

Creating the Stock

The following images show our example part and the profile that we created to revolve for our stock geometry. For this lesson, imagine we have already turned the part on our lathe and now we want to do some milling, so we need create stock that represents our current part.

Part 1) Select the Stock type

By default rectangular stock is selected.

In order to create revolved stock, under Stock Type, select Revolve.

Part 2) Select Geometry

With the Stock Type selected we are ready to select the geometry.

Select all geometry to be revolved.

Part 3) Set the Revolve Axis

Under Revolve Axis, select the Pick Axis option.

The Rotation Axis list box is automatically given focus to allow you to select geometry to add to it.
Click the line representing the Rotation Axis.

The Stock is automatically revolved.
When you are finished defining the stock geometry, click next to go to the Machine Setup.

Mill Turn Revolved Stock Tips

The process of creating revolved stock for Mill Turn jobs is the same as for Mill jobs. The following section describes a few key points of using the revolve stock type for Mill Turn jobs.

Drawing Plane

The geometry that you create for revolved stock does not have to be drawn in the XZ plane, but if you are going to use the same geometry to create turning features, then draw it in the XZ plane of the machining origin (Machine Setup coordinate system) so you do not need to modify the geometry later. (Wireframe geometry for turning features must be drawn in the XZ plane of the machining origin.)