Line Continuous

Introduction

This topic will explainthe Line Continuous function, will explain where to find the function,and explain the options found in it.This topic will also give a briefdescription of Dynamic Drawing, the Snap Increment function, explain creationwith quick steps, and provide links to related topics.

The Line Continuous Function

The Line Continuous function is used to create lines by clicking inthe graphics area once to define the start point and clicking a secondtime to define the end point of the line.You can use the snap pointsof other wireframe entities to define these locations.When using theContinuous After creating the first line, the end point of the previousline becomes the start point of the next line so that you can create acontinuous chain of line entities.

Dynamic Drawing

This function supports Dynamic Drawing which allows you to use a combination of sketching and data entry to create the entities. After initially sketching the entity, it becomes an active entity, which is an entity that is in Modify Mode. Entities in Modify Mode display in the current Entity color, but displays with a greater line thickness to make them easier to identify. Active entities can be modified using data entry. The benefit of Dynamic Drawing is that you can quickly sketch a point to get the approximate result and then use data entry to update to the exact dimensions, and coordinate values as needed.

 

Entities in Modify Mode	Final Entities

 

In the images above, we see entities which are still in Modify Mode, followed by those same entities after they are finalized.

Snap Increment

This function support the use of the snap increment when selecting the location of the entities. The snap increment allows you to get precise results when using mouse selection and helps to reduce data entry modifications.

 

To learn more, view Snap Increment.

Navigation

To open Line Continuous:

• In the Entity group, of the Create 2D ribbon,click the down arrow underLine and clickLine Continuous.

The parameters display in the Data Entry Manager.

The Data Entry Parameters

Creation Option

Parameters

Cursor Reference

• Length - shows the length of the line currently previewed.

• Angle - sets the Angle of the line currently previewed.
  
  

• Abs - sets the angle to an incremental angle.
• Abs - sets the angle to an absolute angle based on the current UCS in use.

• OK - finalizes the function.
  
  
• Cancel - exits the function.

Quick Steps - Line Continuous

Dynamic Drawing Method

1. Open the function and click a snap point or anywherein the graphics area to set the start point of the line.
   
   The Start Point values update to the mouse location.
   
   
   
   You can modify the snap incrementvalue or turn it off while selecting start and end points.
   
   When you move the pointer, the CAD preview displays, and the End Pointvalues update relative to the current mouse position.
   
   
   
   
2. Click another location in the graphics area to setthe End Point of the first line, and the Start Point of the next.
   
   This line is now an active entity, and its End Point, which is nowthe Start Point of the new line, can be adjusted by changing the valuesof the Start Point.
   
   

Tip: When youmove the mouse pointer into the graphics area, the data entry values areupdated to the current screen position.You should keep the mouse pointerin the Data Entry Manager, until you click OK, to avoid changing the CurrentPoint values you have entered.

When you move the pointer, the CAD preview displays, and the End Pointvalues update relative to the current mouse position.

3. Click another location in the graphics area to set the End Pointof the previewed line, and the Start Point of the next.
   
   
   
   
4. Continue this process using any combination of sketching and/ordata entry to create a continuous chain of lines.
   
   
5. To close the function, click Cancel.

Sketch Method

1. Open the function and click a snap pointor anywhere in the graphics area to set the start point of the line.
   
   The Start Point values update to the mouse location.
   
   
   
   You can modify the snap incrementvalue or turn it off while selecting start and end points.
   
   When you move the pointer, the CAD preview displays, and the End Pointvalues update relative to the current mouse position.
   
   
   
   
2. Click another location in the graphics areato set the End Point of the first line.
   
   This line is now an active entity, and its Start Point, and End Point,can both be adjusted by changing the values of the Start Point andEnd Point in the Data Entry Manager.
   
   
   
   When you move the pointer, no CAD preview displays.
   
   The line remains as an active entity until you click OK, or anotherpoint in the graphics area is selected to begin a new line.
   
   
   
   Continue this process using any combination of sketching and/or dataentry to create a the needed lines.
   
   
3. To close the function, click Cancel.

Related Topics

The CADOverview