Wire EDM Overview
Introduction
The Wire EDM module for Bob
Wire Steps
-
In the CAM Tree, right-click CAM Defaults, and click New Job.
-
Set the Job Type to Wire EDM, select the machine, select the Default Parameter Template, and click Stock Wizard.
-
Define the Workpiece if needed and click .
-
Choose the Stock Type, Size, and Orientation, and click .
-
Set machine setup location, and work offset in the Machine Setup page and click OK.
-
Adjust current settings, posts, tools, and stock material in The Wire EDM Job tree.
-
Right-click on the Machine Setup to choose the Features to machine.
-
Use The Mill Wizard to choose the Operations and set their parameters as needed to complete the features.
Next Topic
Click here to go to the Stock Wizard topic.