Open Source Sofware


What is Predator CNC Editor?

With an editor designed just for CNC programs vs. plain text. CNC Editor has lots of powerful CNC specific features yet remains very easy to use. For a minute imagine an office using Notepad instead of Word for word processing. This is how most shops are setup. Editing on the CNC controls can be even more time consuming. Predator CNC Editor is intelligent and knows G code. You can even verify your CNC programs with 3D solid based verification.
Predator G-Code Editor



Why Predator CNC Editor?

  • RS 232/DNC Communications
  • A complete and easy to use G-Code/NC editor
  • Sequence numbers, block skips and comment wizards
  • Bookmarks
  • Change speeds and feeds
  • Quickly locate tool changes
  • Select tools and their assigned programs
  • Insert expressions & ASCII codes
  • Go to wizard
  • Summary information & add your own logos
  • DNC restart & terminal
  • Compare files side by side
  • 3D backplot
  • 3D solid verification
  • Math operations

Predator CNC Editor Software System Requirements

Support for the following minimum computer hardware is required for v7:

  • Pentium 4, AMD Athlon or newer CPU
  • 40 GB or larger hard drive
  • 512 MB or more RAM
  • Mouse
  • USB Port
  • Serial Ports – for DNC communication

NOTE: A nVidia, AMD or 3DLabs based graphics card is highly recommended for Predator Virtual CNC. Like most CAD/CAM systems Predator Virtual CNC will often require high end PC components to support large and complex 3D simulations for optimum performance.


Predator CNC Editor Software Testimonials

  1. EFREN CASTAN says:

    I´d like to review the Predator Pro CNC Editor, please.

    Thanks a lot!

    • Chris says:

      Thank you for your inquiry. Please contact our sales department at 877-262-2231 or 727-442-3554 for details about the CNC Editor product. Thank you.
      BobCAD-CAM, Inc.

  2. modshah says:

    very good cam

  3. Chris says:

    Hi William,
    In order to use the predator Editor you will need our CAD-CAM software and BobCAD-CAM generates the G-Code program for you.
    BobCAD-CAM, Inc.

  4. Chris says:

    Any standard Windows computer would be fine. Specific requirements should be listed on our website.

    BobCAD-CAM, Inc.

  5. David says:

    Hola, tengo un problema, hasta hace una semana funcionaba todo muy bien. ahora tengo el problema de que no puedo generar los codigos g. Que puede haber sucedido?

Leave a Reply to modshah